suziki rm12501

suziki rm12501



REAR SUSPENSION 17-11

REASSEMBLY

•    Apply the rear suspension oil to the O-rings and the “teflon coating metal”.

•    Insert the damper rod assembly © and fit a new circlip (D.

•    Puli up the damper rod assembly © until it is stopped by the circlip (D.

•    Fit the stopper to the shock absorber body.

•    Fili the specified rear suspension oil in the rear shock absorber. (d/“17-8)

fi 99000-99001-S25: SUZUKI REAR SUSPENSION OIL SS-25

mają Oil capacity: Approx. 380 ml (12.84/13.38 US/Imp oz)

•    Reinstall the compression adjuster assembly. (d7“ 17-8)

•    Pressure the rear shock absorber unit with nitrogen gas to 981 kPa (9.8 kgf/cnT, 139.5 psi). (£7117-9)

•    Reassemble the spring and adjust the spring set length. (£7117-4)

•    Tighten the valve cap.

INSTALLATION

Install the rear shock absorber in the re Pay attention to the following points:

•    Lifting up the swingarm, instalIThe rear ShdcMbśorber to the

cushion lever. ,•■'©©©>    \ V

•    Tighten the lower (ęnlaanfing ©pif and nut to the specified torque.

H Rear shock absorberlotwer mounting nut:

60 Nm (6.0 kgf-m, 43.5 Ib-ft)




1

Tighten the upper mounting bolt and nut to the specified torque.

H Rear shock absorber upper mounting nut:

60 N m (6.0 kgf-m, 43.5 Ib-ft)


Wyszukiwarka

Podobne podstrony:
87424 Suzuki RM125 1 REAR SUSPENSION 17-11REASSEMBLY ♦    Apply the rear suspension o
suziki rm12595 REAR SUSPENSION 17-5INSPECTION •    Inspect the rear shock absorber f
suziki rm12597 REAR SUSPENSION 17-7 REAR SUSPENSION 17-7 y © from the rearOIL REPLACEMENT PROCEDURĘ
suziki rm12599 REAR SUSPENSION 17-9 REAR SUSPENSION 17-9 •    Reinstall the compress
suziki rm12503 REAR SUSPENSION 17-13SWINGARMREMOVAL •    Place a błock under the cha
suziki rm12505 REAR SUSPENSION 17-15 • Inspect the bearings, spacers and oil seals for damage. • In
suziki rm12507 REAR SUSPENSION 17-17REAR SUSPENSION LINKAGEREMOVAL •    Place a błoc
suziki rm12509 REAR SUSPENSION 17-19 •    Press fit the bearing cage with the specia
suziki rm12593 REAR SUSPENSION 17-3REAR SHOCK ABSORBERREMOVAL •    Place a błock und
suzuki rm25089 16-16 REAR SUSPENSIONREAR SHOCK ABSORBER REASSEMBLY •    Apply the re
suziki rm12594 17-4 REAR SUSPENSION •    Lifting up the swingarm, remove the rear sh
suziki rm12596 17-6 REAR SUSPENSION 17-6 REAR SUSPENSION • Install the dust seals. NOTĘ: When insta
suziki rm12598 17-8 REAR SUSPENSION 17-8 REAR SUSPENSION • Pour the fresh specified rear suspension
suziki rm12500 17-10 REAR SUSPENSION •    Vise the rear shock absorber unit in inver
suziki rm12502 17-12 REAR SUSPENSIONDISPOSAL High pressure nitrogen gas is sealed in the rear shock
suziki rm12506 17-16 REAR SUSPENSION 17-16 REAR SUSPENSIONINSTALLATION •    Reassemb
suziki rm12508 17-18 REAR SUSPENSION • Insert the spacers into the bearings and inspect them for pl
suziki rm12510 17-20 REAR SUSPENSION • Tighten the cushion lever, cushion rod and swingarm nuts to

więcej podobnych podstron