87424 Suzuki RM125 1

REAR SUSPENSION 17-11

REASSEMBLY

♦    Apply the rear suspension oil to the O-rings and the leflon coating metal".

♦    Insert the damper rod assembly © and lit a new circlip (2>.

♦    Puli up the damper rod assembly © until it is stopped by the circlip <D.

♦    Fit the stopper to the shock absorber body.

♦    Fili the specified rear suspension oil in the rear shock absorber. (0^17-8)

fi) 99000-99001-S25: SUZUKI REAR SUSPENSION OIL

SS-25

H Oil capacity: Approx. 380 ml (12.84/13.38 US/Imp oz)

♦    Reinstall the compression adjuster assembly. (d7"17-8)

♦    Pressure the rear shock absorber unit with nitrogen gas to 981 kPa (9.8 kgf/cm², 139.5 psi), (im 7-9)

♦    Reassemble the spring and adjust the spring set length. (0=17-4)

♦    Tighten the valve cap.

INSTALLATION

Install the rear shock absorber in the reverse\drder

Pay attention to the following pointa:    \ V \ * W \

\ \ \ '■> \ \ \

♦    Lifting up the swingarm, jnstall.the rear shock absorber to the

cushion lever. /©-,    \ W^->

♦    Tighten the lower mountjng ,bplt. and nut to the specified

torque.    J }

<^m' /

H Rear shock absorber lower mounting nut:

60 Nm (6.0 kgf-m, 43.5 Ib-ft)

♦ Tighten the upper mounting bolt and nut to the specified torque.

H Rear shock absorber upper mounting nut:

60 N m (6.0 kgf-m, 43.5 Ib-ft)