Suzuki RM1259

16-12 FRONT FORK AND STEERING

16-12 FRONT FORK AND STEERING

m-v

iron

• Install the new oil seal ® with the special tool until the stopper ring groove of the outer tubę can be seen.

09940-52861: Front fork oil seal installer set

• Attach the stopper ring securely to the stopper ring groove ot the outer tubę.

• Attach the dust seal (i).

NOTĘ:

After attaching the dust seal[ make surę that there are no cracks around the circumference of the seal. Cracks could allow water, mud and the like to enter and cause an oil leak.

CAUTION

Use of grease as a substitute fork oil when installing the oil seal can result in an oil leak. Applying grease to the dust seal and oil seal can cause dirt to accumulate -and damage the dust seal lip and oil seal lip.

Use only a thin coat of fork oil on the oil seal.\ y

COMPRESSION DAMPER UNIT_

NOTĘ:    //'■'"‘-"I

. • •-• ¹ \ | •

Clean each threaded part beforejnstąlłjrig:■

. \ \ \

\ \

t

...

/

1

With the damper rod in fully extended position, pour the spec-ified amount of fork oil.

L&UnD Fork oil quantity (Inside the damper rod):

180 ml (6.08/6.34 US/Imp oz)

<jj»3 99000-99001-SS5: SUZUKI FORK OIL SS-05