27701 Suzuki RM1251
16-14 FRONT FORK AND STEERING
• Force out the remaining oil (discharged oil) using compressed air completely.
• With the damper rod in horizontal position, move the inner rod by hand to inspect it if operating smoothly.
If the inner rod is not extend, repeat the “COMPRESSION DAMPER UNIT' procedures (Pour the specified amount fork oil and discharge an excess ot oil). (£7*16-12)
Make surę approx. 10 mm (0.39 in) of inner rod tbread is exposed on the end.
.. \ V ó \\ \ v>
/\ \ w\\ w \ -
v
i /
* > w
\ \\ \x •• V W
v-
\."-
Approx.10 mm (0.39 in)
t
/
• Completely wipe off the fork oil from the spring and damper rod assembly.
• Insert the spring and damper rod assembly into the fork.
• Temporarily tighten the fork cap bolt (sub-tank).
09941-53630: Front fork top cap wrench
Wyszukiwarka
Podobne podstrony:
Suzuki RM1259 16-12 FRONT FORK AND STEERING 16-12 FRONT FORK AND STEERING m-v iron • Install the ne
Suzuki RM1255 16-18 FRONT FORK AND STEERINGSTEERINGREMOVAL HANDLEBARS • Place a b
Suzuki RM1257 16-10 FRONT FORK AND STEERING INNER TUBĘ AND OUTER TUBĘ ♦ Inspect ł
Suzuki RM1257 16-20 FRONT FORK AND STEERING • Fit the upper and lower outer races with the special
Suzuki RM1259 16-22 FRONT FORK AND STEERING • Align the “A” mark on the throttle grip with the hole
suziki rm12577 16-10 FRONT FORK AND STEERING INNER TUBĘ AND OUTER TUBĘ • Inspect
suziki rm12579 16-12 FRONT FORK AND STEERING • Install the new oil seal (D with t
suziki rm12585 16-18 FRONT FORK AND STEERINGSTEERINGREMOVAL HANDLEBARS • Place a
suziki rm12587 16-20 FRONT FORK AND STEERINGBEARING REPLACEMENT NOTĘ: Replace the outer race and be
suziki rm12589 16-22 FRONT FORK AND STEERING • Align the “A” mark on the throttle grip with the hol
suzuki rm25060 15-14 FRONT FORK AND STEERING • With the outer tubę compressed by hands, remove the
więcej podobnych podstron