suzuki rm25060
15-14 FRONT FORK AND STEERING
• With the outer tubę compressed by hands, remove the special tool.
CAUTION
Removing the locknut ® and pushing the inner rod thread into the damper rod will damage the inner rod oil seal.
Do not remove the locknut ® from the inner rod.
Loosen the fork cap bolt © (sub-tank) and remove the sub tank © along with the damper rod assembly ©.
Remove the fork spring © and spring coller ®.
CAUTION
Disassembling the damper rod assembly can lead to trouble.
Do not disassemble the damper rod assembly.
Do not separate the sub-tank and damper rod assembly.
• Remove the dust seal (D and the stopper ring ®.
CAUTION
Scratches on the inner tubę could cause oil leaks. Avoid scratching when removing.
|
© r. / ŚJj łt i |
© mm |
|
(D |
Wyszukiwarka
Podobne podstrony:
41913 Suzuki RM2508 15-22 FRONT FORK AND STEERING • Clamp the axle holder with a vise. Protect the
suzuki rm25070 15-24 FRONT FORK AND STEERING • Tighten the fork upper clamp bolts
Suzuki RM2500 15-24 FRONT FORK AND STEERING • Tighten the fork upper clamp bolts
suzuki rm25056 15-10 FRONT FORK AND STEERINGSUSPENSION BALANCE Balancing the front to rear suspensi
suzuki rm25058 15-12 FRONT FORK AND STEERINGDISASSEMBLY • Set rebound and compres
suzuki rm25062 15-16 FRONT FORK AND STEERING • Remove the compression damper unit from the sub-tank
suzuki rm25064 15-18 FRONT FORK AND STEERINGSLIDE BUSHING AND GUIDE BUSHING Inspect the “teflon coa
suzuki rm25066 15-20 FRONT FORK AND STEERING • Apply fork oil to the O-rings and
suzuki rm25068 15-22 FRONT FORK AND STEERING 15-22 FRONT FORK AND STEERING • Clamp the axle holder
suzuki rm25072 15-26 FRONT FORK AND STEERING • Remove the steering nut with the s
Suzuki RM2502 15-16 FRONT FORK AND STEERING • Remove the compression damper unit from the sub-tank.
Suzuki RM2504 15-18 FRONT FORK AND STEERINGSLIDE BUSHING AND GUIDE BUSHING Inspect the “teflon coat
Suzuki RM2502 15-26 FRONT FORK AND STEERING • Remove the steering nut with the special tools. IK531
więcej podobnych podstron