suzuki rm25068

suzuki rm25068



15-22 FRONT FORK AND STEERING

15-22 FRONT FORK AND STEERING



• Clamp the axle holder with a vise. Protect the axle holder with a rag when using a vise.

• Compress the outer tubę by hands and install the conrod holder (special tool) between the axle holder bottom and lock-nut.

(S) 09910-20116: Conrod holder

Insert the push rod into the inner rod.

Insert the shaped projection of center bolt into the push rod.

Slowly turn the center bolt clockwis and check the clearance between th to provide morę than 1 mm (0.04 in).


1 mm (0.04 in)



Wyszukiwarka

Podobne podstrony:
41913 Suzuki RM2508 15-22 FRONT FORK AND STEERING • Clamp the axle holder with a vise. Protect the
suzuki rm25059 FRONT FORK AND STEERING 15-13 •    Clamp the axle holder (D with a vi
60169 Suzuki RM2509 FRONT FORK AND STEERING 15-13 ♦    Clamp the axle holder @ with
suziki rm12573 16-6 FRONT FORK AND STEERING •    Clamp the axle holder (D with a vis
suzuki rm25000 FUEL SYSTEM 9-13CARBURETOR SOLENOIDREMOVAL AND INSPECTION •    Remove
22451 Suzuki RM2504 15-8 FRONT FORK AND STEERING • Make surę approx. 10 mm (0.39 in) of inner rod t
suzuki rm25050 15-4 FRONT FORK AND STEERING 15-4 FRONT FORK AND STEERING The fork oil quantity must
suzuki rm25052 15-6 FRONT FORK AND STEERING 15-6 FRONT FORK AND STEERING •    Slide
suzuki rm25054 15-8 FRONT FORK AND STEERING 15-8 FRONT FORK AND STEERING in) of inner rod thread •
suzuki rm25056 15-10 FRONT FORK AND STEERINGSUSPENSION BALANCE Balancing the front to rear suspensi
suzuki rm25058 15-12 FRONT FORK AND STEERINGDISASSEMBLY •    Set rebound and compres
suzuki rm25060 15-14 FRONT FORK AND STEERING • With the outer tubę compressed by hands, remove the
suzuki rm25062 15-16 FRONT FORK AND STEERING • Remove the compression damper unit from the sub-tank
suzuki rm25064 15-18 FRONT FORK AND STEERINGSLIDE BUSHING AND GUIDE BUSHING Inspect the “teflon coa
suzuki rm25066 15-20 FRONT FORK AND STEERING •    Apply fork oil to the O-rings and
suzuki rm25070 15-24 FRONT FORK AND STEERING •    Tighten the fork upper clamp bolts
suzuki rm25072 15-26 FRONT FORK AND STEERING •    Remove the steering nut with the s

więcej podobnych podstron