suzuki rm25070

suzuki rm25070



15-24 FRONT FORK AND STEERING

•    Tighten the fork upper clamp bolts to the specified torque. H Fork upper clamp bolt: 23 N m (2.3 kgf-m, 16.5 Ib-ft)

•    Tighten the fork cap bolt (sub-tank) to the specified torque. (S) 09941-53630 : Front fork top cap wrench

H Fork cap bolt: 35 N m (3.5 kgf-m, 25.5 Ib-ft)

•    Install the handlebars. (d7“12-4)

•    Install the front wheel. (d/^-S)

•    Install the brake caliper. (d/^M-G)




Wyszukiwarka

Podobne podstrony:
Suzuki RM2500 15-24 FRONT FORK AND STEERING •    Tighten the fork upper clamp bolts
41913 Suzuki RM2508 15-22 FRONT FORK AND STEERING • Clamp the axle holder with a vise. Protect the
suzuki rm25056 15-10 FRONT FORK AND STEERINGSUSPENSION BALANCE Balancing the front to rear suspensi
suzuki rm25058 15-12 FRONT FORK AND STEERINGDISASSEMBLY •    Set rebound and compres
suzuki rm25060 15-14 FRONT FORK AND STEERING • With the outer tubę compressed by hands, remove the
suzuki rm25062 15-16 FRONT FORK AND STEERING • Remove the compression damper unit from the sub-tank
suzuki rm25064 15-18 FRONT FORK AND STEERINGSLIDE BUSHING AND GUIDE BUSHING Inspect the “teflon coa
suzuki rm25066 15-20 FRONT FORK AND STEERING •    Apply fork oil to the O-rings and
suzuki rm25068 15-22 FRONT FORK AND STEERING 15-22 FRONT FORK AND STEERING • Clamp the axle holder
suzuki rm25072 15-26 FRONT FORK AND STEERING •    Remove the steering nut with the s
Suzuki RM2502 15-16 FRONT FORK AND STEERING • Remove the compression damper unit from the sub-tank.
Suzuki RM2504 15-18 FRONT FORK AND STEERINGSLIDE BUSHING AND GUIDE BUSHING Inspect the “teflon coat
Suzuki RM2502 15-26 FRONT FORK AND STEERING • Remove the steering nut with the special tools. IK531

więcej podobnych podstron