Suzuki RM125
6-8 CYLINDER, PISTON AND EXHAU$T VALVE
6-8 CYLINDER, PISTON AND EXHAU$T VALVE
PISTON-TO-CYLINDER CLEARANCE
As a result of the previous measurement. if the piston to cylinder clearance exceeds the following limit, replace both cylinder and piston.
EM Piston to cylinder clearance
Service Limit: 0.12 mm (0.0047 in)
EXHAUST VALVE INSPECTION
• Remove carbon deposits from the exhaust main valve CD, side valves © and spacers
• Inspect the exhaust main valve, side valve and spacer for wear and scratches.
• Inspect the cam groove of the side valve for wear.
Inspect the return spring @ tor spring tension.
Conrod smali end borÄ™ Service Limit: 19.040 mm (0.750 in)
09900-20605: Dial gauge
• Fit the piston pin and bearing into the conrod smali end and inspect the play.
• Inspect the bearing for smooth movement.
Wyszukiwarka
Podobne podstrony:
Suzuki RM125? CYLINDER. PISTON AND EXHAU$T VALVE 6-9PISTON RING AND PISTON REASSEMBLY ♦
35148 Suzuki RM125? CYLINDER. PISTON AND EXHAU$T VALVE 6-7 CYLINDER. PISTON AND EXHAU$T VALVE 6-7PIS
Suzuki RM125? CYLINDER, PISTON AND EXH AUST VALVE 6-11 _CAUTION_ If the piston pin end is not at the
87830 Suzuki RM125? CYLINDER, PISTON AND EXHAUST VALVE 6-13 ♦ Remove the pin ® by pushing the retain
Suzuki RM1250 14-6 FRONT AND REAR WHEELSREARWHEEL REMOVAL • Place the motorcycle
Suzuki RM1254 FRONT FORK AND STEERING 16-7 ♦ With the outer tubę compressed by hands, remove the sp
58407 Suzuki RM1258 15-6 FRONT AND REAR BRAKESBRAKE DISC INSPECTION The use of any brake flujdexcep
49847 Suzuki RM1254 FRONT FORK AND STEERING 16-17 ♦ Tighten the fork upper clamp
50956 Suzuki RM1250 15-8 FRONT AND REAR BRAKESREAR CALIPER REMOVAL AND DISASSEM-BLY • &
Suzuki RM1251 10-2 TRANSMISSION AND CRANKSHAFTCONSTRUCTIONTRANSMISSION AND CRANKSHAFT X. "x v
Suzuki RM1253 10-4 TRANSMISSION AND CRANKSHAFTCRANKCASE SEPARATION • Remove the engine sprocket spa
Suzuki RM1255 10-6 TRANSMISSION AND CRANKSHAFT • Measure the gearshift fork thickness with a vernie
więcej podobnych podstron