MR293R19076 1

fhere is no need to retnove the rear shield.

1    - At (1) fit the four bayonnet nuta in the apertures In the vehicle rear crossmember.

2    - Fit in place the two spacers and two

H 10 x 80 bolts in the locations provided in the righthand and lefthand sidemembers.

3 - Offer up the towing attachment crossmember in front of the vehicle rear orossmember and secure it using the four H 8 x 25 bolts, reraembering to fit the spring washcrs. Do not tighten the bolts.

*ł - Fit In suceession the righthand and

lefthand sidemembers attachment:	for	the	towing
- one end secured	to	the	vehi cle
3idemember with	the	H	10 x 80
bolt, nut and washer;

- the other end secured to the towing attachment crossmember by the two H 10 x 30 bolts with the two spring washers,

Tighten all the nuts and bolts: Tightening torąues:

-    H 10 bolt =4.7 daNm

-    H 8 bolt =2.4 daNm

5 - Secure the coupling bali by the four H 12 x 45 bolts and washers.

Tighten the nuts and bolts: Tightening torque:

- H 12 bolt = 8.1 daNm

NOTĘ; For aesthetic reasons, the coupling bali can be removed when the vehicle is not towing.