Page10
10
Fuel system
Mixture formation
The mixture formation is carried out in the intake manifold and in the engine cylinder.
The injection valve injects its fuel di-rectly in front of the inlet valve and when this opens, the Cloud of fuel is drawn along with the air which is sucked in and an ignitible mixture is formed by the swirling action which takes place during the intake cycle.
Fig. 15
Injec tion-valve mounting
Fig. 16
Components ofthe L-Jetronic
1 Air-ilow sensor
2 ControI unit
3 Fuel filter
4 Fuel pump
5 Fuel pressure regulator
6 Auxiliary-air device
7 Thermo-time switch
8 Temperaturę sensor
9 Throtlle-valve switch
10 Start valve
11 Injection valves
I
Wyszukiwarka
Podobne podstrony:
70714 Suzuki RM250? 9-10 FUEL SYSTEMCARBURETORREMOVAL AND DISASSEMBLY • Remove the
89 TransAlp Manual Fuel System 4 FUEL SYSTEMINSTALLATION Install the pilot screws and return them t
20536 Suzuki RM250? 9-12 FUEL SYSTEMINSPECTION • Inspect the following parts for d
S5002146 gp c [1 frag., Fig. 20:6), D [4 1 Fig. 20:2,3], H [1 frag.]. >n was carried out in the a
S5002146 gp c [1 frag., Fig. 20:6), D [4 1 Fig. 20:2,3], H [1 frag.]. >n was carried out in the a
92 Sebastian Ł. Łupiński i in. The studies were carried out in the area of the WNP in the years 1996
87308 MR293R19003 1 The front door pillar and wing panel have to be remoyod before this operat
S5002146 gp c [1 frag., Fig. 20:6), D [4 1 Fig. 20:2,3], H [1 frag.]. >n was carried out in the a
10.2.4 Symbols. 9-4 Site plan. For every investigation which is carried out, a elear site plan shall
The Factors of Influence on the Formation of a Regional Transport-Logistic SystemConclusions of the
67548 Suzuki RM250? 9-8 FUEL SYSTEM 9-8 FUEL SYSTEM When air/fuel mixture is too lean 1) The engine
więcej podobnych podstron