70714 Suzuki RM250—
9-10 FUEL SYSTEM
CARBURETOR
REMOVAL AND DISASSEMBLY
• Remove the seat and fuel tank. (dź*3-2)
• Disconnect the throttle position sensor and solenoid couplers.
• Loosen the carburetor clamp screws and remove the carbure-tor <D.
CAUTION
Do not bend the throttle cable and do not damage the throttle position sensor.
Remove the carbu retor top cap (Z) and throttle valve.
Holding the spring ®, remove the throttle cable\{^ litifrrtjie throttle valve.
C-;:-7
• Remove the cable holder and jet needle.
Wyszukiwarka
Podobne podstrony:
Suzuki RM1251 13-4 ELECTRICAL SYSTEMIGNITION COIL INSPECTION • Remove the seat an
suzuki rm25008 10-6 COOLING SYSTEMREASSEMBLY Reassemble and remount the water pump in the reverse o
Suzuki RM2508 10-6 COOLING SYSTEMREASSEMBLY Reassemble and remount the water pump in the reverse or
46902 Suzuki RM2506 10-4 COOLING SYSTEMWATER PUMP • Drain the engine coolant. (CZ
suzuki rm25006 10-4 COOLING SYSTEMWATER PUMP • Drain the engine coolant. (d7“ 2-1
suziki rm12541 13-4 ELECTRICAL SYSTEMIGNITION COIL INSPECTION • Remove the seat a
25868 Suzuki RM2501 16-18 REAR SUSPENSION Jtć* Remove the spacers. Dust seal Washer Thrus
89 TransAlp Manual Ignition System 6 IGNITION SYSTEMSIDE STAND SWITCH Remove the seat (page 4-31. D
suzuki rm25000 17-4 ELECTRICAL SYSTEMIGNITION COIL • Remove the seat and fuel tan
38640 Suzuki RM250 0 17-4 ELECTRICAL SYSTEMIGNITION COIL • Remove the seat and fue
Suzuki RM250 0 17-4 ELECTRICAL SYSTEMIGNITION COIL • Remove the seat and fuel tank
22451 Suzuki RM2504 15-8 FRONT FORK AND STEERING • Make surę approx. 10 mm (0.39 in) of inner rod t
42791 Suzuki RM250? 94 FUEL SYSTEM As shown below, each of the asterisk (*) marked parts is located
więcej podobnych podstron