suzuki rm25008
10-6 COOLING SYSTEM
REASSEMBLY
Reassemble and remount the water pump in the reverse order of removal and disassembly. Pay attention to the following points:
• Tighten the impeller to the specified torque.
H Impeller: 10 Nm (1.0 kgf-m, 7.0 Ib-ft)
CAUTION
The impeller has left-hand threads.
(3) Washer (D Water pump shaft © Water pump driven gear © Water pump case © Bearing © Oil seal ® Impeller ® Washer
Wyszukiwarka
Podobne podstrony:
Suzuki RM2508 10-6 COOLING SYSTEMREASSEMBLY Reassemble and remount the water pump in the reverse or
46902 Suzuki RM2506 10-4 COOLING SYSTEMWATER PUMP • Drain the engine coolant. (CZ
suzuki rm25006 10-4 COOLING SYSTEMWATER PUMP • Drain the engine coolant. (d7“ 2-1
14423 Suzuki RM2503 12-4 CONSTRUCTIONSREMOUNTING Remount the handlebars in the reverse order of rem
Suzuki RM2503 12-4 CONSTRUCTIONSREMOUNTING Remount the handlebars in the reverse order of removal a
suzuki rm25023 12-4 CONSTRUCTIONS • Remove the handlebars.REMOUNTING Remount the handlebars in the
89 TransAlp Manual Fuel System 4 8 fFUELSYSTEMINSTALLATION Install the air cleaner case in the rever
71232 Suzuki RM250a CLUTCH 5-7INSTALLATION Install the clutch assembly in the reverse order of remov
70714 Suzuki RM250? 9-10 FUEL SYSTEMCARBURETORREMOVAL AND DISASSEMBLY • Remove the
72010 Suzuki RM2501 9-14 FUEL SYSTEMTHROTTLE POSITION SENSORINSPECTION • Disconnect the throttle po
suzuki rm25005 COOLING SYSTEM 10-3 COOLING SYSTEM 10-3 u/ićtibn with a radiator cap pres-COOLING CI
suzuki rm25000 17-4 ELECTRICAL SYSTEMIGNITION COIL • Remove the seat and fuel tan
więcej podobnych podstron