Suzuki RM1252

COOLING SYSTEM 12-3

COOLING SYSTEM 12-3

.V ^N \

W \ '. \\ •

\

'

ENGINE COOLANT

ENGINE COOLANT REPLACEMENT

▲ WARNING

You can be injured by scalding fluid or steam if you open the radiator cap when the engine is hot.

Do not open the radiator cap when the engine is hot. Wait until engine cools.

♦    Place the motorcycle on a błock.

♦    Remove the radiator cap.

Remove the drain pług © and drain engine coolant.

Tighten the drain pług ©.

Pour specified coolant through the radiator inlet hole up to the bottom of filier hole. (0^2-10)

Engine coolant capacity: 1 100 ml (1.2/1.0 US/Imp qt)

Tighten the radiator cap firmly.

Run the engine a few minutes and inspect the coolant lev£l

RADIATOR    < n

RADIATOR CAP INSPĘCTION

♦ Inspect the radiator cap jor fu helion with a radiator cap pres-suregauge.    \

IM Radiator cap va!verelea$epressure:

95-125 kPa (0.95 —1.25 kgf/cm², 13.5 - 17.8 psi)

NOTĘ:

Appty water to radiator cap seai before fitting the radiator cap to the pressure gauge.