47061 Suzuki RM1256
COOLING SYSTEM 12-7
♦ Press the bearing with the special tool.
09913-70210: Bearing installerset
NOTĘ:
When installing the bearing the stamped mark on the bearing musi face outside.
* Hołd the water pump shaft with a wrench and tighten the imppeller bolt to the specified torque.
H Imppeller bolt: 10 N-m (1.0 kgf-m, 7.3 Ib-ft)
V-.____
’\
A..../ /
V
Wyszukiwarka
Podobne podstrony:
suziki rm12536 COOLING SYSTEM 12-7 • Press the bearing with the special tool. (S) 09913-70210: Bear
Suzuki RM1252 COOLING SYSTEM 12-3 COOLING SYSTEM 12-3 .V N W . \ • ENGINE COOLANTENGINE COOLAN
80798 Suzuki RM1254 ELECTRICAL SYSTEM 13-7 ♦ Install the magneto rotor. ♦ &
suziki rm12532 COOLING SYSTEM 12-3 COOLING SYSTEM 12-3 tor cap pres-ENGINE COOLANTENGINE COOLANT RE
Suzuki RM2509 COOLING SYSTEM 10-7 ♦ Install łhe dowel pins (D and new gasket _CAUTION_ Use a new ga
Suzuki RM1259 REAR SUSPENSION 17-9 ♦ Reinstall the compression adjuster assembly.
38557 Suzuki RM1259 FUEL SYSTEM 11-7REED VALVEREMOVAL • Remove the carburetor. (£
Suzuki RM1255 GEARSHIFTING 9-3GEARSHIFT LINKAGEREMOVAL ♦ Drain transmission oil.
Suzuki RM1250 ELECTRICAL SYSTEM 13-3 ELECTRICAL SYSTEM 13-3 x vIGNITION SYSTEMIGNITION SYSTEM PEAK
22079 Suzuki RM1252 ELECTRICAL SYSTEM 13-5 [3523 ■nfTTnrni Unit: V Positive © probe pin (Diodę
44367 Suzuki RM2505 COOLING SYSTEM 10-3COOLING CIRCUIT INSPECTIONCOOLING CIRCUIT Before removing th
więcej podobnych podstron