suziki rm125
32

COOLING SYSTEM 12-3

COOLING SYSTEM 12-3

tor cap pres-

ENGINE COOLANT

ENGINE COOLANT REPLACEMENT

A WARNING

You can be injured by scalding fluid or steam if you open the radiator cap when the engine is hot.

Do not open the radiator cap when the engine is hot. Wait until engine cools.

•    Place the motorcycle on a błock.

•    Remove the radiator cap.

•    Remove the drain pług © and drain engine coolant.

•    Tighten the drain pług ©.

•    Pour specified coolant through the radiator inlet hole up to the bottom of filier hole. (d/⁼2-10)

(^3 Engine coolant capacity: 1 100 ml (1.2/1.0 US/lmpqt)

•    Tighten the radiator cap firmly.

•    Run the engine a few minutes and inspect the coolant I

RADIATOR

RADIATOR CAP INSP

• Inspect the radiator cap for fu surę gauge. /

Maja Radiator cap valve release pressure:

95-125 kPa (0.95-1.25 kgf/cm², 13.5 - 17.8 psi)

NOTĘ:

Apply water to radiator cap seal before fitting the radiator cap to the pressure gauge.