suziki rm125
40

ELECTRICAL SYSTEM 13-3

IGNITION SYSTEM

IGNITION SYSTEM PEAK VOLTAGE INSPECTION

•    Remove the seat and fuel tank.

•    Remove the spark pług.

•    Disconnect the magneto lead wire coupler ©.

Measure the ignition system peak voltage in the following procedurę:

•    Connect the multi Circuit tester with peak volt adaptor as fol-lows. (See table below.)

•    Measure the highest peak voltage by depressing the kick starter lever several times forcefully.

IiTTTliTTTi iii

Red/White- Black/Red	30 V and morę
Green - Red	3 V and morę

0 09900-25008: Multi Circuit tester set Tester knob indication: Voltage (“)

•    Connect the magneto lead win ignition coil lead wire coupler

•    Connect the multi between Black/Whit

•    Measure the highes starter lever several ti

U7.U-1

IiTTTliTTTi iii

ak volt adaptor e/Blue lead wire. by depressing the kick

Black/White - White Blue

210 V and morę

ct the

NOTĘ:

Be surę the Red probe pin to connected to the Black/White lead wire and Black probe pin to the White/Blue lead wire.