Suzuki RM2509

Suzuki RM2509



ELECTRICAL SYSTEM 17-3

Measure the ignition system peak voltage in the following procedurę:

♦    Connect the multi Circuit tester with the peak volt adaptor as tollows. (See table below.)

♦    Measure the highest peak voltage by depressing the kick starter lever morę than 3 times forcefully.


09900-25008: Multi Circuit tester


Red/White- Black/Red

25 V and morę

Green - Red

2 V and morę

(l@J Tester knob indication: Voltage (~)

Connect the magneto lead wire coupler and disconnect the ignition coil lead wire coupler

\ •


Connect the multi Circuit tester with tt}e. peak yoJt ądaptor

\ \ » *, •. \ ^ ,/

between Black/White lead wire and White/Blue lead wire.

|    V    . V    I •./’

Measure the highest peąk vóltkge by depreśsing the kick starter lever morę than 3 tirhes forćefully>


\ i


Black/White - White/Błue )


200 V and morę


.......

Kjr.

»*»»/


■*-

*

v_..-


/


NOTĘ:

Be surę to connect the Red probe to the Black/White lead wire and the Black probe to the White/Blue lead wire.


• 1»v»

£ asa

^ »:Y

r.«    —


W/BI

B/W



Wyszukiwarka

Podobne podstrony:
suzuki rm25099 ELECTRICAL SYSTEM 17-3 Measure the ignition system peak voltage in the following pro
suzuki rm25001 ELECTRICAL SYSTEM 17-5 Unit: Approx. V Positive © probe pin (Diodę
47905 Suzuki RM250 1 ELECTRICAL SYSTEM 17-5Unit: Approx. VPositive ® probe pin (Diodę terminal) 03 c
Suzuki RM2508 17-2 ELECTRICAL SYSTEMELECTRICAL CIRCUITIGNITION SYSTEM PEAK VOLTAGE ♦   &n
Suzuki RM2508 17-2 ELECTRICAL SYSTEMELECTRICAL CIRCUITIGNITION SYSTEM PEAK VOLTAGE ♦   &n
Suzuki RM2500 FUEL SYSTEM 9-13 FUEL SYSTEM 9-13CARBURETOR SOLENOIDREMOVAL AND INSPECTION ♦  &n
44367 Suzuki RM2505 COOLING SYSTEM 10-3COOLING CIRCUIT INSPECTIONCOOLING CIRCUIT Before removing th
suzuki rm25000 FUEL SYSTEM 9-13CARBURETOR SOLENOIDREMOVAL AND INSPECTION •    Remove
suzuki rm25002 FUEL SYSTEM 9-15REMOVAL AND REMOUNTING •    Remove the carburetor. (d
suzuki rm25007 COOLING SYSTEM 10-5IMPELLER AND GEAR SHAFT • Inspect the impeller and gear shaft for
suzuki rm25009 COOLING SYSTEM 10-7 • Install the dowel pins © and new gasket (D. _CAUTION_ Use a ne
73666 Suzuki RM2507 COOLING SYSTEM 10-5IMPELLER AND GEAR SHAFT * Inspect the impeller and gear shaf
80798 Suzuki RM1254 ELECTRICAL SYSTEM 13-7 ♦    Install the magneto rotor. ♦  &
54423 Suzuki RM250 2-6 PERIODIC MAINTENANCESPARK PŁUG Inspect the spark pług condition. electrode c
67548 Suzuki RM250? 9-8 FUEL SYSTEM 9-8 FUEL SYSTEM When air/fuel mixture is too lean 1) The engine

więcej podobnych podstron