suzuki rm250
99

ELECTRICAL SYSTEM 17-3

Measure the ignition system peak voltage in the following procedurę:

•    Connect the multi Circuit tester with the peak volt adaptor as follows. (See table below.)

•    Measure the highest peak voltage by depressing the kick starter lever morę than 3 times forcefully.

Red/White- Black/Red	25 V and morę
Green - Red	2 V and morę

&0J Tester knob indication: Voltage (~) |S) 09900-25008: Multi Circuit tester

Connect the magneto lead wire coupler and disconnect the ignition coil lead wire coupler d).

Connect the multi Circuit tester with t between Black/White lead wire and W Measure the highest peak voltage by d starter lever morę than 3 times

yoit adaptor wire. sing the kick

Black/White-White/BhJe^) ) l ^J 200 V and morę

NOTĘ:    —'

Be surę to connect the Red probe to the Black/White lead wire and the Black probe to the White/Blue lead wire.

W/BI B/W