suziki rm12536
COOLING SYSTEM 12-7
• Press the bearing with the special tool.
(S) 09913-70210: Bearing installer set
NOTĘ:
When installing the bearing the stamped mark on the bearing must face outside.
H Imppeller bolt: 10 N-m (1.0 kgf-m, 7.3 Ib-ft)
• Hołd the water pump shaft with a wrench and tighten the imppeller bolt to the specified torque.
Wyszukiwarka
Podobne podstrony:
47061 Suzuki RM1256 COOLING SYSTEM 12-7 ♦ Press the bearing with the special tool. 09913-70210: Bea
suziki rm12532 COOLING SYSTEM 12-3 COOLING SYSTEM 12-3 tor cap pres-ENGINE COOLANTENGINE COOLANT RE
Suzuki RM1252 COOLING SYSTEM 12-3 COOLING SYSTEM 12-3 .V N W . \ • ENGINE COOLANTENGINE COOLAN
suziki rm12509 REAR SUSPENSION 17-19 • Press fit the bearing cage with the specia
89559 Suzuki RM1253 12-4 COOLING SYSTEMRADIATOR REMOVAL • Remove the seat and fue
Suzuki RM1253 12-4 COOLING SYSTEMRADIATOR REMOVAL • Remove the seat and fuel tank
46902 Suzuki RM2506 10-4 COOLING SYSTEMWATER PUMP • Drain the engine coolant. (CZ
suziki rm12527 FUEL SYSTEM 11-5CLEANING After cleaning, reassemble theo Replace the removei A WARNI
suziki rm12529 FUEL SYSTEM 11-7REED VALVEREMOVAL • Remove the carburetor. (d/“ 11
suziki rm12544 ELECTRICAL SYSTEM 13-7 • Install the magneto rotor. •
suziki rm12579 16-12 FRONT FORK AND STEERING • Install the new oil seal (D with t
suzuki rm25006 10-4 COOLING SYSTEMWATER PUMP • Drain the engine coolant. (d7“ 2-1
36875 Suzuki RM125 9 REAR SUSPENSION 17-19 • Press fit the bearing cage with the special tool and a
suziki rm12540 ELECTRICAL SYSTEM 13-3IGNITION SYSTEMIGNITION SYSTEM PEAK VOLTAGE INSPECTION •
więcej podobnych podstron