Suzuki RM2507

16-4 REAR SUSPENSION

REBOUND DAMPING FORCE ADJUSTMENT

•    Tum the adjuster © clockwise until it stops (fuli hard position). NOTĘ:

Do not force the adjuster past the stopped position, or you may damage the adjuster.

•    Turn the adjuster © counterclockwise the specified clicks so that the punched mark ® will be aligned with the punched mark ®.

EES3 Rebound damping force adjuster

Standard setting: 11 clicks turns out

SPRING PRE-LOAD ADJUSTMENT

•    Place a błock under the chassis tubę.

•    Remove the seat and right frame cover. (d/"3-2,12-2)

•    Removethe silencer.

Loosen the air cleaner ciamp screw.

Remove the bolts and nut (right andjeft) an&rernbye the rear frame assembly.

/w

. \ *.

' N \ I

' i

♦ Loosen the lock nut © with the special tool.

09910-60611: Universal clamp wrench

•    Turn the adjuster (2) clockwise or counterclockwise to change the spring pre-load.

•    Tighten the lock nut ®.

B Standard spring set length: 6.3 mm (0.24 in)

(Standard spring set length: 6.3 mm compressed from spring free length)

Spring set length adjustable rangę: 2-12 mm

(0.08 - 0.47 in)

NOTĘ:

Turning the adjuster <2) without loosening the lock nut © can damage the rear cushion unit.

• To remount the rear frame assembly reverse the sequence as described.

IE3H