Suzuki RM250s
MAGNETO ROTOR AND STATOR 7-5
♦ Fit a naw gasket.
♦ Tighten the magneto cover bolts to the specified torque. [*] Magneto cover bolt: 11 Nm (1.1 kgf-m, 8.0 Ib-ft)
INSPECTION AFTER INSTALLATION
After installing the stator and magneto rotor, inspect the follow-
ing.
• Wire harness routing (d7*19-12)
Wyszukiwarka
Podobne podstrony:
Suzuki RM250q MAGNETO ROTOR AND STATOR 7-3REMOVAL ♦ Remove the seat. (CT3-2) ♦
44283 Suzuki RM250r 7-4 MAGNETO ROTOR AND STATOR • Remove the stator. • &nbs
25719 Suzuki RM125i ENGINE REMOVAL AND INSTALLATION 5-5 ♦ Disconnect the radiator
80798 Suzuki RM1254 ELECTRICAL SYSTEM 13-7 ♦ Install the magneto rotor. ♦ &
Suzuki RM2500 FUEL SYSTEM 9-13 FUEL SYSTEM 9-13CARBURETOR SOLENOIDREMOVAL AND INSPECTION ♦ &n
Suzuki RM2502 FRONT AND REAR WHEELS 13-7REAR SPROCKET REPLACEMENT ♦ Tighten the nuts to the specifi
19971 Suzuki RM125 5 REAR SUSPENSION 17-15 ♦ Inspect the bearings, spacers and oil seals for damage.
78208 Suzuki RM2509 FRONT FORK AND STEERING 15-23 ♦ Tighten the center bolt to the specified torque
49847 Suzuki RM1254 FRONT FORK AND STEERING 16-17 ♦ Tighten the fork upper clamp
Suzuki RM2507 PERIODIC MAINTENANCE 2-21REAR SUSPENSION ♦ Move the rear suspension
Suzuki RM250c CLUTCH 5-9 ♦ Fit the clutch cover ®. ♦ Tighten the
więcej podobnych podstron