MR293R19068 1

MR293R19068 1



FITTING THE 100 nm D1AMF.TER SFEAKEBS IN THE EHDS OF THE DASHBOARD

Remove the two 3 ram x 15 acrews (1), (2) holding bhe grille in place and remove the grille.

Secure the 100 ram diaaeter speaker (part no. 77 01 *120 423 or 77 01 320 424) to the grille using the three 4 ram x 10 3elf-tapping screws, inserting a plastie washer under the head of the lower screw which is nearest the outside of the vehicle.

The speaker is held at the fourth securing point by the gcrew holding the grille towarda the inside of the yehicle (2).

Conneot the speaker.

Reftt the grille and fit the speaker u3ing the two 3 rara x 15 acrews.

* E1 = TR, TS, TD

E2 = GTS, GTX, GTD, GTR


Wyszukiwarka

Podobne podstrony:
41791 MR293R19069 1 FITTING THE TWEETERS IM THE ENDS OF THE DASHBOARD Reraove the two 3 mm x 15 ser
MR293R19074 1 FITTING THE TOWING ATTACHMENT Remove the emergency wheel (the shield stays in place).
78440 MR293R19071 1 FITTING THE 165 n«n DIAHETER SPEAKERS IN THE DOORS In the front doors, tum the
MR293R19066 1 FITTING THE RADIO With the ignition switched off, unclip the radio oover from the das
22086 MR293R19074 1 Free the two corresponding cloth sections At the front, remove the rivet froro
86515 MR293R19063 1 1)    Disoormect the batfcery. 2)    FITTING THE
PICT0274 (2) Przekrój podłużny nr 5 [ skala 1 : 100/1000 H proj. ter. x

więcej podobnych podstron