MR293R19074 1
FITTING THE TOWING ATTACHMENT
Remove the emergency wheel (the shield stays in place).
Fit the cage nuta in apertures A, B, C and D in the vehicle rear erosamember.
Fit crossraeraber (1) (see diagram on previoua page) and secure it uaing the four 8 mm diaraeter screws and wa3hers at A, Br C and D.
Fit spacers (T) (tubę with an oblong fiat) in the lefthand and righthand sidemerabers (E).
Position arm (3),
Fit the end of crossmember (F) to the piąte using two 6 mm diameter 3crews and washer3 (the piąte is tapped).
Pass the 8 mm dla. x 70 screw through sidemember (E) and fit the washers, Do the same for the righthand arm (2).
Tighten the assembly.
See page3 19 and 20 for fitting the ba mesa.
Wyszukiwarka
Podobne podstrony:
MR293R19068 1 FITTING THE 100 nm D1AMF.TER SFEAKEBS IN THE EHDS OF THE DASHBOARD Remove the two 3 r
41791 MR293R19069 1 FITTING THE TWEETERS IM THE ENDS OF THE DASHBOARD Reraove the two 3 mm x 15 ser
78440 MR293R19071 1 FITTING THE 165 n«n DIAHETER SPEAKERS IN THE DOORS In the front doors, tum the
MR293R19066 1 FITTING THE RADIO With the ignition switched off, unclip the radio oover from the das
MR293R19073 1 It tnust be pointed out that this towing attachment i$ fitted without the 3hield havi
MR293R19079 1 TOWING ATT ACHMEHT Fitttng the wiring harness To the towing attachment Pass the end o
MR293R19077 1 Dlsconneot the battcry, remove the luggage compartment carpet and the lefthand and ri
22086 MR293R19074 1 Free the two corresponding cloth sections At the front, remove the rivet froro
więcej podobnych podstron