26124 Suzuki RM125 8
SYMBOL MARKS AND MATERIALS
Listed in the table below are the symbols indicating instructions and other information. The meaning of each symbol is also included in the table.
SYMBOL
DEFINITION
Torque control required.
Data beside it indicates specified torque.
Use SUZUKI REAR SUSPENSION OIL SS-25 or equivalent rear suspension oil. 99000-99001-S25
Apply oil. Use engine oil ortransmission oil unless otherwise specitied.
Use engine coolant.
Apply SUZUKI SUPER GREASE “A”. 99000-25030 (USA)
99000-25010 (Others)
Apply or use brake fluid. (DOT4)
Apply SUZUKI SILICONE GREASE. 99000-25100
Measure in yoltage rangę.
Apply SUZUKI BOND “1207B”. 99104-31140 (USA)
99000-31140 (Others) ^
v\
\ \ > •. V-
Measure inres i stance rangę.
\
Apply THREAD LOCK SUPER ri303t x 99000-32030 ^x \ \\ ' X \ \
/ .... ^ V ■-'*
/ /** ^ \ ->
I • _ I .• X*-
-1—4-f
Apply THREAD LOCK SUPER ‘ 1322 \ 99000-32110 (Except USA)
Measure in diodę test rangę.
Use special tool.
IJMmTnrn
Apply THREAD LOCK “1342”. 99000-32050
Indication of service data.
Ki
Apply THREAD LOCK SUPER '1360". 99000-32130
Replace a part with a new one when reassembling.
Use SUZUKI FORK OIL SS-05 or equivalent fork oil.
99000-99001-SS5
Wyszukiwarka
Podobne podstrony:
Suzuki RM250 5 SYMBOL Listed in the table below are the symbols indicating instructions and other in
Suzuki RM1250 14-6 FRONT AND REAR WHEELSREARWHEEL REMOVAL • Place the motorcycle
Suzuki RM1254 FRONT FORK AND STEERING 16-7 ♦ With the outer tubę compressed by hands, remove the sp
Suzuki RM125? 6-8 CYLINDER, PISTON AND EXHAU$T VALVE 6-8 CYLINDER, PISTON AND EXHAU$T VALVE PISTON-T
suzuki rm25014 19-8 SERVICE DATA TIGHTENING TORQUE CHART For other bolts and nuts not listed in the
58407 Suzuki RM1258 15-6 FRONT AND REAR BRAKESBRAKE DISC INSPECTION The use of any brake flujdexcep
19971 Suzuki RM125 5 REAR SUSPENSION 17-15 ♦ Inspect the bearings, spacers and oil seals for damage.
49847 Suzuki RM1254 FRONT FORK AND STEERING 16-17 ♦ Tighten the fork upper clamp
50956 Suzuki RM1250 15-8 FRONT AND REAR BRAKESREAR CALIPER REMOVAL AND DISASSEM-BLY • &
Suzuki RM1251 10-2 TRANSMISSION AND CRANKSHAFTCONSTRUCTIONTRANSMISSION AND CRANKSHAFT X. "x v
Suzuki RM1253 10-4 TRANSMISSION AND CRANKSHAFTCRANKCASE SEPARATION • Remove the engine sprocket spa
Suzuki RM1255 10-6 TRANSMISSION AND CRANKSHAFT • Measure the gearshift fork thickness with a vernie
Suzuki RM1257 10-8 TRANSMISSION AND CRANKSHAFT 10-8 TRANSMISSION AND CRANKSHAFT m-v iron • &n
Suzuki RM1251 13-4 ELECTRICAL SYSTEMIGNITION COIL INSPECTION • Remove the seat an
Suzuki RM1252 14-8 FRONT AND REAR WHEELSREAR SPROCKET REPLACEMENT • Remove the rear sprocket. NOTĘ:
więcej podobnych podstron