37918 Suzuki RM1251

37918 Suzuki RM1251



10-12 TRANSMISSION AND CRANKSHAFT

10-12 TRANSMISSION AND CRANKSHAFT

Install the right crankcase half on the left crankcase :half.

\ vx ' '


•    Apply transmission oil to the tollowing parts: bearings, gear-shift forks, gearshift shatts gearshift cam.

•    Reassemble the gearshift forks ®,    ®.

• Install the gearshift cam (6) and gearshift shafts ®.

NOTĘ:

Tum the gearshift cam to the neutral position and confirm that the driveshaft and countershaft tum without resistance.

CRANKCASE REASSEMBLY

• Install the new gasket and dowel pins.

• Tighten the crankcase bolts.

i    \

[5 Crankcase bolt: 10 N m (1.0_kgf-m, 7.3 tb-ft) x

/    —    >    'i '•x'"    v

NOTĘ:    / S \

•    ^    \    i    •

Ifit is hard to tighten the boits,separatę the crankcase and confirm that the transmission parts-areasśembled correctly.

Instaii the damp to the bolt ®.

•    Inspect the crankshaft for smooth movement.

•    Apply grease to Oil seal and O-rings CD. Fit the O-rings CD and spacer <2> to the driveshaft.


\\ \\ \ \

' V M ’




Wyszukiwarka

Podobne podstrony:
50402 Suzuki RM1255 16-8 FRONT FORK AND STEERINGINNERTUBE • Separate the inner tubę out of the oute
Suzuki RM1251 10-2 TRANSMISSION AND CRANKSHAFTCONSTRUCTIONTRANSMISSION AND CRANKSHAFT X. "x v
Suzuki RM1253 10-4 TRANSMISSION AND CRANKSHAFTCRANKCASE SEPARATION • Remove the engine sprocket spa
Suzuki RM1255 10-6 TRANSMISSION AND CRANKSHAFT • Measure the gearshift fork thickness with a vernie
Suzuki RM1257 10-8 TRANSMISSION AND CRANKSHAFT 10-8 TRANSMISSION AND CRANKSHAFT m-v iron •  &n
Suzuki RM1259 10-10 TRANSMISSION AND CRANKSHAFT INSTALLATION • Press the bearings with the special
Suzuki RM1259 16-12 FRONT FORK AND STEERING 16-12 FRONT FORK AND STEERING m-v iron • Install the ne
14035 Suzuki RM125? 6-10 CYLINDER, PISTON AND EXH AUST VALVE •    Install the exhaust
86618 Suzuki RM250? 8-14 TRANSMISSION AND CRANKSHAFT •    Install the gearshift cam d

więcej podobnych podstron