41937 tmta1
Lower the armhole by 1-3 cm. Widen the sides by 1-3 cm, and widen CB and CF by 1 cm, reducing the shaping down the CF. Ensure the back and front waist combined equal at least half the looped tape measurement. Rule a vertical construction linę through the waist centre on Front and Back.
Enlarge the back and front neckline to a size which will slip on over the head, about 60 cm all round: here the neckline has been lowered by 2 cm at CB and NR and 3 cm at CF. To plan the skirts see Fig 4.
b. Sleeve Measure the new armhole. Tracę the sleeve Błock and enlarge the sleeve head to match, here by a total of 3.5 cm, see Blocks, Fig 25. The sleeve shown is elbow length, 35 cm down the Back seam and 40 cm wide at A-A. Complete the pattern, marking SP, SG and seam allowances.
171
Wyszukiwarka
Podobne podstrony:
83696 tmta1 b. Enlarging the sleeve. Measure the new armhole and notę the increase. Tracę off
36225 tmta3 Lower the new front neckline by the same amount. Measure the new neck edge ot the bodic
tmta1 Early gowns, worn by both men and women 4. Early buttoned gown, late 14th/early 15th century
tmta1 cInfants The dress of this age group, from a few months to about three years, would have comp
tmta1 8. Puff sleeve for Fig 6 The sleeve is in two parts: the lower section, madę up with interlin
tmta1 8. Puff sleeve for Fig 6 The sleeve is in two parts: the lower section, madę up with interlin
83850 tmta8 20 cm b. Wide but shallow neckline to match the surcote in Surco
f2 6 Search/Replace Find
tmta1 LiningLining, Fig 12, PI 1 The lining is normally cut to the same shape as the outer layer of
tmta1 Planning and cutting a shirt or smock The pieces are simple in shape, so the following instru
14542 tmta1 7. Planning your working pattern Follow the instructions for the garment, where key sec
więcej podobnych podstron