57372 Suzuki RM1256

57372 Suzuki RM1256



TRANSMISSION AND CRANKSHAFT 10-7

TRANSMISSION AND CRANKSHAFT 10-7

ieru


♦ Measure the crankshaft runout with V-blocks and dial gauge.

B Crankshaft runout

Service Limit: 0.05 mm (0.002 in)

09900-20606: Dial gauge (1/100 mm) 09900-20701: Magnetic stand

09900-21304: V-block

* Measure the crankshaft web to web width with a vernier cali-pers.

U Width between webs

Standard: 53.9-54.1 mm (2.122 - 2.130 in)

(Sj 09900-20101: Yernier calipers

OIL SEAL INSPECTION, REMOVAL AND INSTALLATION

♦ inspect each oil seal lip for wear and damagęv. \\ \


\ ^\\\\ > ■ K \ \ \ V



♦ Remove the oil seal with the special tool.


09913-50121: Oil seal remover


Wyszukiwarka

Podobne podstrony:
Suzuki RM1257 FRONT AND REAR BRAKES 15-15REASSEMBLY • Fit the return spring properly. - Apply SUZUK
76932 Suzuki RM1254 TRANSMISSION AND CRANKSHAFT 10-5 ♦ Remove the driveshaft ass’y ® and countersha
80817 Suzuki RM1252 TRANSMISSION AND CRANKSHAFT 10-3ENGINE BOTTOM SIDE ♦    Dismount
Suzuki RM1252 TRANSMISSION AND CRANKSHAFT 10-13 TRANSMISSION AND CRANKSHAFT 10-13 i iPRIMARY DRIVE
27882 Suzuki RM1255 FRONT AND REAR WHEELS 14-1FRONT AND REAR WHEELS -CONTENTS CONSTRUCTłON
49847 Suzuki RM1254 FRONT FORK AND STEERING 16-17 ♦    Tighten the fork upper clamp
Suzuki RM1259 FRONT AND REAR WHEELS 14-5 Apply grease to the bearings. Reassemble the bearings and
Suzuki RM1251 FRONT AND REAR WHEELS 14-7BEARING REPLACEMENT • Remove the dust seals with the specia
Suzuki RM1253 FRONT AND REAR BRAKES 15-1 -CONTENTS CONSTRUCTION

więcej podobnych podstron