The Information in this instruction book is presented in good faith. but no warran-ty is given nor results guaranteed, nor is freedom from any patent to be inferred. Inasmuch as we have no control over physical conditions surrounding the ap-plication of information herein eon-tained. MANGELSENS disclaims any liability for untoward results.
The ornaments in this book are madę with beads and wire. and in some cases, beading Ihread or nylon monofilament string. There are several ornaments madę with beads and safety pms on pages 11*15.
Order numbers tor each bead may vary ac-cording to quantity of beads needed for each project.
If suggested wire lengths are too long to work with easily. use shorter pieces and fasten ends together as shown in Figurę A. Crimp loops tightly together so they will go through hole in beads.
Holiday Characters in Beads were designed by Sue Gauley, East Moline, IL.
Ring of Jewels was designed by Helen Graeser, Villa Ridge, MO.
Winter Scene was designed by Lana J. Morse. East Moline, IL.
Riley’s Treasure and Pearl Wreath were designed by Joann S. Palmer, Chico, CA.
The Cartwheel Wreath and Star were designed by Rosabel Snethen, Miami, OK.
Cartwheel Beads * is a Registered Trademark of HAROLD MANGELSEN & SONS, INC. Omaha, NE
FIGURĘ A
Ali other projects were designed by Carolyn Johnson, Marlene LaChapelle and Elaine Lewis, all of Mangelsen*s, Omaha.
Omaha, NE 68127
FIGURĘ C
// \\ Twist
Ol Wlngs)
Repeat on two wires for second arm.
Materials:
161 — 6mm Transparent Faceted Beads, Crystal (376 90)
36 — 15mm Berry Beads, AB Light Blue (426-79)
2 20mm Berry Beads, Crystal (427*27)
1 — 25mm Wood Doli Head Bead, Girl (162-63)
28 ga. Barę Spool Wire, Silver (658-97)
24 ga. Barę Spool Wire, Silver (659-09)
Beading Thread and Needle
Scissors
White Craft Glue
Wire Cutters
Ruler
SKIRT
1. Cut ten 14'* wires. Place 1 blue berry bead on one end of each wire and twist wire as in Figurę A.
2. Using blue berry beads, attach one end of 36” wire to one wired bead as in Figurę B. * Add 1 bead, run wire down through another wired bead, up around outside of bead, and wrap long wire around shorter wire (Figurę B); puli wire tight; repeat from * until all ten wires are connected on long wire. Run long wire through first wired bead and twist wire end to back, forming a circle of 10 berry beads with all exposed wires on inside of circle. Run 10” wire through berry beads added in Step 2.
3. Add 1 faceted bead to each short wire (from Step 1).
4. Thread needle with 48” thread doubled and knot thread ends. Run needle down through one faceted bead, up between threads at top of bead and puli tight (Figurę C). * Run needle up through faceted bead on wire (from Step 3), add 2 faceted beads, run needle down through next faceted bead on wire, around and back through faceted bead on wire (Figurę D); repeat from * 8 morę times, add 1 faceted, run needle through next faceted (withJenot).
5. Cut thread and rethread needle with one strand. Bring needle around and through last faceted bead added in Step 4. Tie both strands in a knot, push knot to inside of circle and trim thread.
6. Add 1 blue berry bead to each wire (from Step 1). " Bring next Iwo wires together and add 1 blue berry bead to both wires (Figurę E); repeat from * 4 morę times. Twist all ten wires together 1V* ”.
7. Thread needle and add 1 faceted as in Step 4. Run needle up through 1 berry bead in 10-bead row (Figurę F), * add 4 faceted. bring thread around last faceted and back through next 2 faceted. add 1 faceted, run needle down through next berry bead, add 1 faceted, run needle around faceted and back up through berry bead (Figurę F); repeat from * around, adding thread as needed.
Run needle and thread around thread at top of berry bead at beginning of row. Knot and cut threads as in Step 5.
11/4” twisted wire.
9. Separate two wires, add 6 faceted to both wires, run wires around last bead and back through first 5 beads for arm (Figurę G).
10. For wing, cut 24” piece of 24 ga. wire. Add 31 faceted beads to one end of wire, forming a circle and twist wires together Va” with 3” wire end remaining. Add 31 faceted to long wire, form a circle, twist remaining wire ends together and over Va" twist. Shape into wings (Figurę H).
11. Separate remaining six wires from crystal berry beads (body) into Iwo sets of three wires, place twist of wing between sets, then twist all six wires together 1/8”.
12. Pry top 3-row piece from remaining berry bead and glue to top of head to hide hole. Run three body wires up through head, add 6 faceted, shape into halo and run wires back down through bead and puli tight. Twist all six wires together tightly to secure. If head is loose, twist halo to tighten head.
2