Flowrate for low-pressure air Cooling water pressure Cooling water flowrate Cooling water temperaturę
Flowrate for cooling tower Pressure for cooling tower Cooling tower temp
For PET production
401/min (0.7-0.9Mpa under working pressure) 0.3-0.4 M Pa 50L/min (PET- PP)
10-15 C (PET)
15-30 C (PP)
80L/min 0.2-0.4 M Pa 5-32 C
- Materiał dehumidifying and drying machinę: machining capability 120kg/h. dew point below -24 C
- Vacuum feeding machinę: 50kg/h
- Vacuum hopper: 10L
- Mold temperaturę controller:
maximum oil temperaturę 100 C, flowrate 301/min, pressure 0.4MPa
- Water cooling machinę:
compressor power 5 horsepower. pressure 0.3-0.4 MPa. flowrate lOOL/min, temperaturę 10-15 C. temperaturę controlling precision 3 C
- High pressure compressor:
pressure 3-3.5Mpa. displacement lm3/ min
- Freezing high-pressure purifylng and drying machinę (with filter)
- Low pressure compressor:
pressure 0.7-0.9MPa. flowrate 40L/min (0.7-0.9MPa under working pressure)
- Ali attached accessories should be purchased separately
For PP production
- VaCuum feeding machinę: 50kg/h
- Vacuum hopper: 10L
- Water cooling machinę:
compressor power 3 horsepower. pressure 0.3-0.4MPa, flowrate 50L/min. temperaturę 10-30C, temperaturę controlling precision ±1C
- Medium pressure compressor:
pressure 1.2-1.5MPa, displacement lm3/ min
- Freezing high-pressure purifying and drying machinę (with filter)
- Low pressure compressor:
pressure 0.7-0.9MPa. flowrate 40L/min (0.7-0.9MPa under working pressure)