suziki rm12516
TRANSMISSION AND CRANKSHAFT 10-7
• Measure the crankshaft runout with V-blocks and dial gauge.
IB Crankshaft runout
Service Limit: 0.05 mm (0.002 in)
|S] 09900-20606: Dial gauge (1/100 mm)
09900-20701: Mag net ic stand 09900-21304: V-block
• Measure the crankshaft web to web width with a vernier cali-pers.
Ifflaja Width between webs
Standard: 53.9-54.1 mm (2.122-2.130 in)
|S) 09900-20101: Vernier calipers
OIL SEAL INSPECTION, REMOVAL INSTALLATION
• Inspect each oil seal lip for wear and
• Remove the oil seal with the special tool.
IfooJ 09913-50121: Oil seal remover
Wyszukiwarka
Podobne podstrony:
suziki rm12512 TRANSMISSION AND CRANKSHAFT 10-3ENGINE BOTTOM SIDE • Dismount the engine. (d/^-S) NO
suziki rm12514 TRANSMISSION AND CRANKSHAFT 10-5 • Remove the driveshaft ass’y © and countershaft as
suziki rm12510 TRANSMISSION AND CRANKSHAFT 10-1TRANSMISSION AND CRANKSHAFT -CONTENTS- CONSTRUCTION
suziki rm12520 TRANSMISSION AND CRANKSHAFT 10-11TRANSMISSION REASSEMBLY TRANSMISSION AND CRANKSHAFT
suziki rm12522 TRANSMISSION AND CRANKSHAFT 10-13 TRANSMISSION AND CRANKSHAFT 10-13PRIMARY DRIVE GEA
57372 Suzuki RM1256 TRANSMISSION AND CRANKSHAFT 10-7 TRANSMISSION AND CRANKSHAFT 10-7 ieru ♦ Measur
76932 Suzuki RM1254 TRANSMISSION AND CRANKSHAFT 10-5 ♦ Remove the driveshaft ass’y ® and countersha
80817 Suzuki RM1252 TRANSMISSION AND CRANKSHAFT 10-3ENGINE BOTTOM SIDE ♦ Dismount
Suzuki RM1252 TRANSMISSION AND CRANKSHAFT 10-13 TRANSMISSION AND CRANKSHAFT 10-13 i iPRIMARY DRIVE
suziki rm12547 FRONT AND REAR WHEELS 14-3FRONT WHEELREMOVAL • Place the motorcycl
suziki rm12551 FRONT AND REAR WHEELS 14-7BEARING REPLACEMENT • Remove the dust seals with the speci
suziki rm12557 FRONT AND REAR BRAKES 15-5BRAKE PADS REPLACEMENTFRONT BRAKE PADS • Remove the cap ©
suziki rm12567 FRONT AND REAR BRAKES 15-15REASSEMBLY • Fit the return spring prop
więcej podobnych podstron