Darrieus Wind Turbine Design, Construction And Testing

background image

Darrieus wind turbine: Design, construction and testing


Abstract:


Abstract

Background: We needed to find a location to set up a permanent 2kW turbine for performance monitoring, and we decided to help out
our friend Scott. He desperately needed to save money on his electricity bill due to all his wild parties.

Design: An alternate design had to be approached, so we decided to construct a prototype 2kW Vertical Axis Wind Turbine (VAWT)
using a straight blade Darrieus design. The Darrieus vertical axis windmill was patented in 1927 by the French Inventor Georges
Darrieus and is a lesser known alternative to the typical 3 bladed HAWT

Construction: The Darrieus airfoil was traced onto 20” x 3” x 0.5” pieces of chipboard and cut to shape with a jig-saw and a rasp.
Each piece of chip-board was drilled, then glued together using two long threaded rods for alignment. Measuring and cutting took
several hours to complete, but was well worth the effort

Testing: At 65km/hr the turbine was really going!!! I was sort of hesitant to stick my head out of the window at this speed and have a
look, so I wound up the window. The load was applied and we were able to generate a few hundred watts for a several seconds then
there was a big WOOSHHHHH and the blade came flying off into some poor blokes paddock.

Keywords: Wind power, Wind turbine construction, Darrieus wind turbine, Scotty’s hippie ranch




http://warlock.com.au/scottsturbine.htm (1 of 8)29.06.2006 21:24:50

background image

Darrieus wind turbine: Design, construction and testing

http://warlock.com.au/scottsturbine.htm (2 of 8)29.06.2006 21:24:50

background image

Darrieus wind turbine: Design, construction and testing

http://warlock.com.au/scottsturbine.htm (3 of 8)29.06.2006 21:24:50

background image

Darrieus wind turbine: Design, construction and testing

http://warlock.com.au/scottsturbine.htm (4 of 8)29.06.2006 21:24:50

background image

Darrieus wind turbine: Design, construction and testing

http://warlock.com.au/scottsturbine.htm (5 of 8)29.06.2006 21:24:50

background image

Darrieus wind turbine: Design, construction and testing

http://warlock.com.au/scottsturbine.htm (6 of 8)29.06.2006 21:24:50

background image

Darrieus wind turbine: Design, construction and testing

http://warlock.com.au/scottsturbine.htm (7 of 8)29.06.2006 21:24:50

background image

Darrieus wind turbine: Design, construction and testing

http://warlock.com.au/scottsturbine.htm (8 of 8)29.06.2006 21:24:50


Document Outline


Wyszukiwarka

Podobne podstrony:
Design Requirements For Medium Sized Wind Turbines For Remote And Hybrid Power Systems
Darrieus Wind Turbine
Variable Speed Control Of Wind Turbines Using Nonlinear And Adaptive Algorithms
04 Wind Turbine Power, Energy And Torque
0 Wind Energy Small Wind Turbine Design Notes
Wind Turbine Design Codes A Preliminary Comparison of the Aerodynamics
Simulation, construction and testing of a two cylinder solar Stirling engine powered by a flat plate
Tesla Wind Turbine Grid Connection And Interaction
Synchronous Generator And Frequency Converter In Wind Turbine Applications System Design And Efficie
Design Fatigue Test and NDE of a Sectional Wind Turbine Rotor Blade
CEI 61400 22 Wind turbine generator systems Required Design Documentation
1801 Design Analysis of Fixed Pitch Straight Bladed Vertical Axis Wind Turbines
Blade sections for wind turbine and tidal current turbine applications—current status and future cha
(WinD Power) Dynamic Modeling of Ge 1 5 And 3 6 Wind Turbine Generator {}[2003}
[US 2006] D517986 Wind turbine and rotor blade of a wind turbine
Advanced Methods for Development of Wind turbine models for control designe
CEI 61400 22 Wind turbine generator systems Required Design Documentation
Wind Turbine and Grid Connection Modelling with PSCAD

więcej podobnych podstron