GB AWT 6084
A.  Start Button
B.  Temperature Indication lamps
C.  Spin Speed Selection Button
1)
Do not use liquid detergents.
2)
For improved garment care, spin speed is restricted to
600 rpm in this programme.
3)
For improved garment care, spin speed is zero in this
programme.
B A C
Detergents and additives Special Options Max.
Max.
Spin
load Prewash Main Softener Bleach Cold Wash Half Load Intensive Rinse Hold
Care
Speed
Programme Type of wash / Notes Wash Rinse
Labels
Lavaggio Mezzo Risciacquo
Anti Piega
rpm
kg
Freddo Carico Intensivo
Cotton 90° Prelavaggio Cotone Heavily soiled bed linen, table linen and underwear, towels, shirts etc. made of cotton and
5.0 Yes 1) Yes 800
with prewash 90° linen.
Synthetic 60° Prelavaggio Sintetici Heavily soiled blouses, shirts, overalls etc. made of polyester (Diolen, Trevira),
2)
2.0 Yes 1) Yes  600
with prewash 60° polyamide (Perlon, Nylon) or blends with cotton.
Delicate 40° with Prelavaggio Delicati
2)
Curtains and delicate clothing, dresses, skirts, shirts and blouses. 1.5 Yes 1) Yes    600
prewash 40°
Cotton Cotone Normally soiled bed linen, table linen and underwear, towels, shirts etc. made of
5.0  Yes 800
40°-60°-90° 40°-60°-90° cotton and linen.
Synthetic Sintetici Slightly to normally soiled blouses, shirts, overalls etc. made of polyester (Diolen,
2)
2.0  Yes  600
60°-40° 60°-40° Trevira), polyamide (Perlon, Nylon) or blends with cotton.
2)
Delicate 40° Delicati 40° Curtains and delicate clothing, dresses, skirts, shirts and blouses. 1.5  Yes    600
Only woollens with a felt-free finish, labelled with the woolmark and identified as
2)
Wool 40° Lana 40° machine washable. 1.0  Yes    600
If you select  Rinse Hold do not leave items to soak for too long.
Textiles made of silk, linen, wool and viscose marked as  handwashable .
3)
Silk 30° Seta 30° 1.0  Yes    0
If you select  Rinse Hold do not leave items to soak for too long. No spinning.
Risciacquo e Same as the last two rinses and the final spin in the  Synthetic programme.
2)
Rinse + Spin  2.0      600
Centrifuga Programme for treating wash with starch or softener.
Rinse + Risciacquo e Same as the last rinse and the final spin in the  Cotton programme.
 5.0      800
Intensive Spin Centrifuga Intensiva Programme for treating wash with starch or softener.
In this programme spinning is intensive. Same as the spin cycle in the  Cotton
Intensive Spin Centrifuga Intensiva  5.0        800
programme.
In this programme spinning is gentle. Same as the spin cycle in the  Wool
2)
Spin Centrifuga  2.0        600
programme.
Drain Scarico Acqua  Drain only - no spinning. Alternative method of terminating programme after  Rinse Hold .         
N.B. This machine is controlled by sensors. Please avoid excessive detergent dosing.
Whirlpool is a registered trademark of Whirlpool USA.
5019 312 00042
 Rinse Hold button
PROGRAMME START
CONSUMPTION DATA
" The laundry remains in the last rinse water
Temperature Selector Load Water Energy Approx. Programme without progressing to the final spin cycle to Turn on the tap and press the  Start button. The
Programme Duration
avoid creasing and prevent colours from fading. indicator lamp of the  Start button lights up.
(°C) (kg) (l) (kWh) (hours : minutes)
Note: If there is a power interruption or if the
" This option is particularly recommended for the
Cotton 90 5.0 *63 1.80 2:05 appliance is disconnected during the cycle, the
 Synthetic or  Delicate programmes.
programme will run again from the point where it was
" This function is particularly useful if you want to
Cotton 60 5.0 55 0.95 2:05
interrupted.
postpone spinning to a later time, or if you want
Cotton 40 5.0 55 0.55 2:05
to drain only.
Synthetic 60 2.0 56 0.80 1:35 END OF WASH CYCLE
Note: The programme selector knob stops on the
Synthetic 40 2.0 50 0.40 1:30
" The programme selector knob is in the  Stop
position   .
Delicate 40 1.5 60 0.55 0:50
position  O .
Appliance in  Rinse Hold :
Wool 40 1.0 60 0.50 0:40
" Press the  Rinse Hold button again: the
1. Press the  On/Off button to switch off the
Silk 30 1.0 60 0.30 0:50
programme will terminate automatically with the
machine.
Prewash cycle increases programme duration approximately 15 min. Consumption values were measured in normalized
selected spin cycle.
2. Turn the tap off.
conditions in compliance with standard IEC 60 456. Consumption data in the home may vary with respect to the values in
3. Wait for the door to unlock (about 1 minute).
If you do not wish to spin the clothes, turn the
the table in relation to the water supply pressure and temperature, the load and the type of wash.
programme selector knob to the  Drain programme 4. Open the door and the drum flaps and unload
The data on the  Energy Label refer to the programme  Cotton 60°C .
* To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains
and press the  Start button again. the machine.
the water out.
 Spin Speed Selection button
CHANGE THE PROGRAMME DURING THE WASH
 Cold Wash button
PREPARATION OF WASH CYCLE
" The appliance selects the spin speed proposed
CYCLE
" Can be used with all washing programmes.
for the programme choosen.
1. Load the machine, close the drum flaps and check
" Suppresses heating of the water.
1. Turn the programme selector knob to the new
" Press the button to set another spin speed.
that they are properly locked.
 Half Load button programme. The programme selector knob
" If the spin speed  0 is selected, the final spin is
2. Add detergents and additives into the dispenser
" Can be used for small loads and lightly soiled laundry. moves half a step and the pilot lamp of the
cancelled, but not the intermediate spins. The
to no more then the  MAX level mark, as follows:
" Reduces the water consumption especially during  Start button flashes. If necessary, select the
programme ends with a drain cycle.
" Programme with pre and main wash
the rinses. additional options and the spin speed.
" Main wash programme without prewash
 Intensive Rinse button 2. Start programme by pressing the  Start
" Fabric softeners and conditioners
button.
" One rinse cycle is added to ensure a more intensive
" Chlorine bleach
rinse.
" Stain remover agents PAUSE/INTERRUPT A PROGRAMME
" This option is particularly suitable for areas with
" Anti-scale agents (if necessary)
very soft water, washing baby linen and people If, for any reason, you wish to interrupt the
3. Press the  On/Off button. The pilot lamp of the
with detergents allergies. programme for a certain time and continue it later:
 On/Off button, a spin speed indicator lamp
1. Press the  On/Off button.
and, in case of availability, a temperature
2. After the desired pause, press again on the
indicator lamp light up.
 On/Off button.
4. Turn the programme selector knob to the desired
programme and temperature. The knob will move
CANCEL PROGRAMME
half a step for correct positioning. The
1. Set the programme selector to  Drain .
temperature indication (if available) switches
2. Press the  Start button to start the  Drain
to the selected temperature.
programme.
SELECT THE DESIRED OPTION
Selecting or deselecting an option can be done at
any time during the programme. The option will
be applied as long as the corresponding
programme phase has not been executed yet.
Whirlpool is a registered trademark of Whirlpool USA.
5019 312 00042