GB AWT 2240/1 - AWT 2250/1
Programme duration figures (guideline) are
 Cold
valid for maximum temperature wash with no
 Machine Off
special functions.
 No Spin
5 kg
I' : option / Yes: dosing required
1)
Do not use liquid detergents.
2)
Max 400 rpm for AWT 2240
Max 500 rpm for AWT 2250
Max. Detergents and additives Options Temperature Maximum Programme
load Selector Spin time
Prewash Main Softener Bleach Half Load
Speed approx.
Programme Type of wash / Notes Wash
kg °C rpm min.
Heavily soiled sheets, tablecloths, underclothes, shirts etc. in hard wearing and high temperature resistant
Cotton with
2)
cotton. 5.0 Yes 1) Yes I' I' I' from to 95 Max. 130
Prewash
The maximum load for heavily soiled washing is 3.5 kg.
Moderately soiled sheets, tablecloths, underclothes, towels etc. in hard wearing and high temperature
2)
Cotton 5.0  1) Yes I' I' I' from to 95 Max. 115
resistant cotton.
Averagely soiled blouses, shirts etc. made of polyester (Diolen, Trevira); polyamide (Perlon, Nylon), or
2)
Coloured 2.0  1) Yes I'  I' from to 60 Max. 100
cotton blends.
2)
Quick Wash Blouses, shirts, cotton blouses, dark coloured terry towelling, jeans, etc. lightly soiled. 5.0  1) Yes I'  I' from to 40 Max. 85
Lightly soiled shirts, blouses etc., made of polyester (Diolen, Trevira), polyamide (Perlon, Nylon) or cotton
2)
Synthetics 2.0  1) Yes I'  I' from to 40 Max. 70
blends.
This programme allows starch or softener to be added.
2)
Rinse + Spin 5.0  1)  I'  I' Max. 20
It is followed by an intensive spin cycle.
2)
Spin Programme for intensive spin cycle. 5.0  1)      Max.15
2)
Delicate Delicate fabrics and curtains (dresses, skirts, shirts, blouses, etc.). 1.5  1) Yes I'   from to 40 Max. 55
2)
Wool Machine washable woollens with pure new wool label. 1.0  1) Yes I'   from to 40 Max. 45
This programme allows starch or softener to be added.
2)
Rinse + Spin 1.5  1)  I'   Max. 15
It is followed by a gentle spin cycle.
2)
Spin Programme for gentle spin cycle. 1.5  1)      Max. 10
1)
Drain Drain only, without spin cycle.         5
N.B. This machine is controlled by sensors. Please avoid excessive detergent dosing.
Whirlpool is a registered trademark of Whirlpool USA.
5019 312 10221
DOOR LOCK TO STOP, RESET A PROGRAMME BEFORE
ENERGY AND WATER CONSUMPTION DATA
THE END
During the running programme, the door cannot be
Programme Temperature Load Water Energy Programme
1. Turn the spin speed knob to the Off position
opened.
time
  to switch off the appliance.
The door locks automatically in all programmes.
The pilot light goes out.
If the programme is stopped or if an electrical
(°C) (kg) (l) (kWh) (min)
2. Set the programme selector on  Drain .
power failure occurs, the door unlocks
3. Turn the spin speed knob to the desired spin
automatically after about 1 minute.
Cotton 90 5.0 72 1.80 115
speed to start the  Drain programme.
Cotton 60 5.0 72 1.15 115 PROGRAMME END
Only open the door when the programme
Coloured 60 2.0 60 0.80 100
" The programme selector knob is at  STOP , selector is at  STOP and the door is unlocked
Coloured 40 2.0 60 0.40 100
the pilot lamp lights.
(after approximately 1 minute).
Quick Wash + 1/2 Load 40 2.5 54 0.50 85 1. Turn the spin speed knob to the Off position
NOTES AND INDICATIONS FOR USE
  . The pilot light goes out.
Synthetics + 1/2 Load 40 2.0 54 0.40 70
2. Cancel the options by pressing the appropriate
" After switching your washing machine on, it
Delicate 40 1.5 70 0.65 55
buttons.
does not start immediately: it needs some
Wool 40 1.0 70 0.65 45
3. Turn the water supply tap off.
seconds in order to lock the door, fill water and
Prewash cycle increases programme duration approximately 15 min. Consumption values were measured in normalized
4. Wait for the door to unlock (about 1 minute).
then drum starts turning.
conditions in compliance with standard IEC 60 456. Consumption data in the home may vary with respect to the values in the
5. Open the door and the drum flaps and unload
" Spinning has an interrupted start-up: the drum
table in relation to the water supply pressure and temperature, the load and the type of wash. The data on the  Energy
the machine.
Label refer to the programme  Cotton 60 .
starts and stops running several times, to
* The remaining time indicator can similarly deviate from the values in the table, because it takes into account the household
improve spin efficiency and to better balance
SELECTING A NEW PROGRAMME, SPIN
conditions applicable at that time.
the laundry.
SPEED, OPTIONS AFTER PROGRAMME
** To reduce the water temperature, some cold water is added at the end of the main wash cycle, before the pump drains the
water out. START " At the end of the spinning cycle the drum goes
on reversing for some minutes: this helps you
PREPARATION OF WASH CYCLE PRESS ANY DESIRED OPTION BUTTON(S)
1. Turn the spin speed knob to the Off position
unloading the laundry.
  to switch off the appliance.
1. Close the drum flaps and check that they are
 Half Load button " Do not exceed in detergents dosage: excessive
The pilot light goes out.
properly locked.
" Reduces the water consumption in the  Cotton foam formation may prevent spinning.
2. Select the new programme, temperature and
2. Add detergents and additives into the dispenser and  Synthetics programmes especially during " The turning of the drum is stopped in several
options.
to no more then the  MAX level mark, as the rinse. steps of the washing cycle due to optimization
3. Turn the spin speed knob to the desired spin
follows: " Especially suitable for lightly soiled or small loads of energy consumption.
speed to switch on the appliance.
(reduces the quantity of detergent).
" Programme with pre and main wash
The pilot light lights.
" Not suitable for high temperature programmes.
" Main wash programme without prewash
PROGRAMME START
" Fabric softeners and conditioners
" Chlorine bleach
Open the water inlet tap and select the desired spin
" Stain remover agents speed, turning the spin speed and  On/Off knob to
the desired position (the indicated spin speed or
" Anti-scale agents (if necessary)
 No Spin ). The pilot lamp lights up.
3. Turn the programme selector knob clockwise
to the desired programme.
4. Turn the temperature knob to the required
temperature.
Whirlpool is a registered trademark of Whirlpool USA.
5019 312 10221