CABIN AIR FILTER
Particulate Air Filter - Grand Caravan, Town & Country
REMOVAL & INSTALLATION
REMOVAL
1. Remove the lower glove box bin from the instrument panel:
Open lower glove box door.
While pressing on both sides of the door pull the door down until stops are disengaged from the
lower IP panel.
Carefully disengage the bottom hinges and remove the door.
2. Disengage the two retaining tabs (1) that secure the particulate air filter cover (2) to the passenger side of
the HVAC air distribution housing (3) and remove the cover. See Fig. 1
Fig. 1: Removing/Installing Particulate Filter Cover
Courtesy of CHRYSLER LLC
NOTE:
Manufacturer's terminology for this filter is Particulate Air Filter.
WARNING:
Always make sure the A/C-heater system is turned off and that the
ignition switch is in the OFF position prior to servicing the particulate air
filter. Never place fingers or other objects into the filter opening of the
HVAC housing. Failure to follow this warning may result in serious injury.
NOTE:
LHD model shown in illustrations. RHD model similar.
2009 Chrysler Town & Country LX
CABIN AIR FILTER Particulate Air Filter - Grand Caravan, Town & Country
2009 Chrysler Town & Country LX
CABIN AIR FILTER Particulate Air Filter - Grand Caravan, Town & Country
steve
Monday, May 23, 2011 1:10:52 PM
Page 1
© 2006 Mitchell Repair Information Company, LLC.
steve
Monday, May 23, 2011 1:10:55 PM
Page 1
© 2006 Mitchell Repair Information Company, LLC.
3. Remove the particulate air filter (1) from the air distribution housing (2) by pulling the filter element
straight out of the housing. See Fig. 2
Fig. 2: Removing/Installing Particulate Filter
Courtesy of CHRYSLER LLC
INSTALLATION
1. Install the particulate air filter (1) into the filter opening in the HVAC air distribution housing (2). Insert
the particulate air filter directly into the housing with the arrow on the filter pointing to the floor. See
Fig.
3
NOTE:
The particulate air filter is labeled with "Airflow" and an arrow to indicate air
flow direction through the filter. This arrow should always be oriented towards
the floor of the vehicle. Make sure to properly install the particulate air filter.
Failure to properly install the filter will result in the need to replace the filter
sooner than required by design.
2009 Chrysler Town & Country LX
CABIN AIR FILTER Particulate Air Filter - Grand Caravan, Town & Country
steve
Monday, May 23, 2011 1:10:52 PM
Page 2
© 2006 Mitchell Repair Information Company, LLC.
Fig. 3: Removing/Installing Particulate Filter
Courtesy of CHRYSLER LLC
2. Position the particulate air filter cover (2) to the air distribution housing (3) and engage the two retaining
tabs (1) that secure the cover to the housing. Make sure the retaining tabs are fully engaged. See Fig. 4
Fig. 4: Removing/Installing Particulate Filter Cover
Courtesy of CHRYSLER LLC
3. Install the lower glove box bin:
Place the lower glove box door into position and engage the hinges.
Raise door while pressing in on both sides until the stops engage in the panel opening.
2009 Chrysler Town & Country LX
CABIN AIR FILTER Particulate Air Filter - Grand Caravan, Town & Country
steve
Monday, May 23, 2011 1:10:52 PM
Page 3
© 2006 Mitchell Repair Information Company, LLC.
Close the glove box.
2009 Chrysler Town & Country LX
CABIN AIR FILTER Particulate Air Filter - Grand Caravan, Town & Country
steve
Monday, May 23, 2011 1:10:52 PM
Page 4
© 2006 Mitchell Repair Information Company, LLC.