J-I-6
PARTS-SERVICE Date: May 20, 1986
Model: E25-60XL
J40-60XL
El.25-3.00XL (Europe
GRAM
metric)
Hydraulic
SUBJECT: Hydraulic Motor Mounting Bracket
An improved hydraulic pump motor mounting arrangement is being used on current model trucks.
If it becomes desirable to alter an old style mounting arrangement you can order the necessary parts and use
the Installation sketch on page 2 of this gram.
To avoid welding, it is only necessary to grind off the present mounting bracket from the truck frame, then drill
three .38 (10mm) diameter holes thru the new mounting bracket and battery bulk head, as shown in Figure 1.
Bolt the new bracket in place, and assemble the rest of the parts as shown in Figure 2.
The parts required to make the conversion are as follows:
Item Part No. Quantity Description
1 371647 1 Bracket
2 373675 1 Bracket Weldment
3 373875 2 Grommet
4 15178 2 Washer - 1/2
5 355374 2 Clamp
6 287854 4 Cpscr M10 x 1.5 x 25
7 136692 4 Nut M10 x 1.5
8 292682 4 Lock Washer - 10
9 136681 3 Cpscr M8 x 1.25 x 20
10 292681 6 Lock Washer - 8
11 325058 1 Rod
12 132861 3 Cpscr M8 x 1.25 x 35
13 239503 3 Nut M8 x 1.25
Parts Stock:
Not affected
Effective Serial Number:
C114V-1621, C108V-2102, B168V-1401, C114T-1501, C108T-1534F, C108A-1771G,
C114A-1755G
We reserve the right to make changes in design or add improvements without incur-
ring the obligation to make such changes in equipment previously manufactured.
H6030
J-I-6 page 2