SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00
www.cobra.it
PETROL
PEUGEOT 406* 02 DIESEL

MAKE MOD. YEAR.
X
* Models with original equipment keyless entry system.
ALARM/SIREN Position the compact alarms and the sirens on the dome of the shock absorber,
passenger s side.
POSITION
CENTRAL UNIT POSITION Position the modular systems and the modules under the dashboard, driver s side.
POWER SUPPLY + 30: connect to the 3 mm2 RED wire located at the entrance of the fuse box.
- 31: connect to one of the original ground terminals located on the right of the BSI
operating central..
IGNITION WIRE + 15/54: connect to the wire at the position nr. 16 coming out of the 26 way blue
connector of the BSI operating central.
DIRECTION INDICATORS Connect to the wires at the positions nr. 13 and nr. 14 of the 16 way black
connector coming out of the BSI operating central.
ELECTRIC WINDOWS Positive control signal
Front window, driver s side:
Refer to the diagram nr. 114.
Front window, passenger s side:
Cut the 1 mm2 GREY wire located at the position nr. 10.
Rear window, driver s side:
Cut the 1 mm2 VIOLET wire located at the position nr. 7.
Rear window, passenger s side:
Cut the 1 mm2 GREY wire located at the position nr. 6.
These connections are made directly in the 16 way black connector coming out of
the push-button panel in the armrest of the driver s side door.
ACTIVAT./DEACTIVATION Connections antitheft/vehicle
CONTROLS Refer to the diagram nr. 115.
IMMOBILISATION POINT Gasoil pump
Cut the GREY wire located in the wiring harness coming out of the connector of the
inertial switch.
STARTER + 50: Cut the BLUE wire located in the wiring harness coming out of the 3 way
connector, on the left of the steering column.
BONNET SWITCH Install an additional switch on the front headlamp support plate, driver s side.
DOORS SWITCH Connect to the wire, at the position nr. 14 coming out of the 26 way blue connector
of the BSI operating central.
Note: The lamp polarity is positive.
BOOT SWITCH Break version: connect to the wire located at the position nr. 7 coming out of the
26 way blue connector of the BSI operating central.
Other versions: connect to the WHITE wire marked 315 directly in the connector
coming out of the boot lamp.
pe40602gbdt.doc
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.
SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00
www.cobra.it
FITTING DIAGRAM N° 115
Diagram for the interfacing of art. 3800 on
PEUGEOT 406 year 2002
Art. 3800
26 way 16 way
blue connector black connector
ORANGE/WHITE
+30
nr.10 nr.23 nr.4 nr.3 YELLOW/BLACK
GREY/BLACK
VIOLET/WHITE
ground
Diodes 1N4004
M
VIOLET
ORANGE
Driver s side Passenger s side
door s switch AP AP door s switch
pe40602gbdt.doc
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.
SPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00
www.cobra.it
FITTING DIAGRAM N° 114
Diagram for windows connection on
PEUGEOT 406 year 2002
Diagram for windows locking using the BROWN/WHITE wire of the autodriven Bridge serie
antithefts.
Left push botton
1052
16 way
black connector
1 2 3 4 5
+30 position nr.12
YELLOW
Diode 1N4004
BROWN/WHITE
Diagram for windows locking using the BROWN wire of the no autodriven Bridge serie, 3100
and 3800 antith efts.
Left push botton
1055
16 way
black connector
1 2 3 4 5 6 7
position nr.12
+30 YELLOW
Diode 1N4004
BROWN
pe40602gbdt.doc
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual.