VSS1 - Programming mode flowchart - Alarm disarmed * : If IG OFF -> ON is operated more than 5 times, Step 1 - All door closed you have to repeat procedure again ² : Some cars have this option as original function - Turn key to IG ON position 5 times * Å‚ : Some cars cannot have the horn sounding in addition of siren Step 2 - or press start button until IG ON 5 times * REM: depending system, blinkers are flashing instead of LED - Final key position IG ON (! Do not start engine) LED ON: Program mode is activated Turn IG OFF Select the programming mode by number door Step 3 EXIT open & close (Door closing count) Feature Activation or Deactivation Mode Diagnostic Mode 1 x 2 x 5 x 9 x 3 x 4 x Buzzer Auto door lock Add car Horn Passive arming Alarm memory Installation conf mode mode² modeÅ‚ mode mode mode Turn IG OFF Turn IG OFF Turn IG OFF Turn IG OFF Turn IG OFF Turn IG OFF LED & buzzer LED & buzzer LED & buzzer LED & buzzer LED & buzzer LED & buzzer Flashes 1x Flashes 2x Flashes 5x Flashes 9x Flashes 3x Flashes 4x Open door Activate any other move hand in front trigger (door, hood, of US sensor. To deactivate the mode To activate the mode additional sensor Number of LED flashes and Open and close 1 x Open and close 2 x beeps will indicate last 3 LED and hazard LED ON and driver door driver door alarm triggers with 2 sec flashes when buzzer sound pause. trigger when trigger Turn IG ON & OFF Turn IG ON & OFF Close & Open door EXIT: Turn IG ON or LED & buzzer LED & buzzer again wait 5 min Flashes 1x Flashes 2x EXIT: Turn IG ON Turn IG ON Turn IG ON 2 beeps confirms exit or wait 30 sec Rev 1.0 Publication no. ASM 000 079-0