Cleaning the EGR valve  the vacuum type
First you will need to take off the plastic cover of the engine,
if you have one.
The second step is to remove the rubber hose that goes on the
EGR valve. After you have done that, you need to unscrew this
screws (circled red)
WARNING  unscrew them when the engine is warm and spray some
WD40 before unscrewing. If the screws don t turn after a few
tugs, leave them in  you don t want to break them.
These files are free for private use, hosting them on web sites is allowed only by contacting the author.
Files where made by SvenJTD ( http://free-zg.t-com.hr/svenjtd/ ), a member of
BOO  Bravo/a owners organization ( www.fiatboo.co.uk )
After you have taken the screws out, it will look like this:
Now take the EGR and soak it in some carb cleaner like so:
Fill the hole pointed with a yellow arrow and leave it to soak
about an hour.
These files are free for private use, hosting them on web sites is allowed only by contacting the author.
Files where made by SvenJTD ( http://free-zg.t-com.hr/svenjtd/ ), a member of
BOO  Bravo/a owners organization ( www.fiatboo.co.uk )
After it was soaking for an hour, dry it with a cloth or a
towel.
And it will look like this, if not do the above again.
Now take the hose and attach it on the EGR valve. And with your
mouth suck in the air out of it. When you sucked enough the
valve will open.
Do it a few times so the valve can work it self in.
After you have done that, take the EGR valve back to the car and
put it back on its place. And you are done.
These files are free for private use, hosting them on web sites is allowed only by contacting the author.
Files where made by SvenJTD ( http://free-zg.t-com.hr/svenjtd/ ), a member of
BOO  Bravo/a owners organization ( www.fiatboo.co.uk )