{Change Comments ***********************************************************}

{10/31/89
Copied & modified: Fan 6M MS MV35 [¨] M051.55
For: Accutool
Machine: Matsura RA2
Control: Yasnac MX3
Modified per customer requests.
JR}

{7/24/90, Added InitProg globally to posts with this remark, DWB}

{4/26/91,
Modified: Yasnac MX3 Mat [AM] M267.62
For: Gibbs & Associates
Updated to Version 4.0 per Fanuc 6M M001.80 Format.
DWB}

{2/25/93
Copied & modified: Yasnac MX3 Mat [AM] M267.79
For: Majic Mfg
Updated to Version 4.1 per Fanuc 6M M001.81 Format.
Changed OfstOff in MachSpec to output G49.
Changed FORMAT for Dwell to 3 place, Trailing Zeros.
250 = 1/4 second.
Changed Comments back to M001 standard.
Moved CRCOff back to M001 standard.
Added FIRST TOOL NOT IN SPINDLE.
Added ASCII('13') at FirstOperation and NewTool.
Moved Speed SpinOn to StrPos block at FirstOperation and NewTool.
Changed IncValue to WFOOff at OfstOff block at NewTool, SameTool and end of Prog.
This is a one shot G53 code to return to Machine Reference Coordinates, i.e. Fanuc G28.
Added Rigid Tapping Mode at Drilling.
Added G89 Bore Cycle with Dwell at Drilling.
JR}

{8/17/93
Updated: Yasnac MX3 Mat [MM] M553.81
For: Gibbs & Associates/Matsurra
Updated per Fanuc 6M M001.81.2 Format.
Needed for creation of Yas MX3 Mat [AbsZAC] M.81.2 for Makato Uemura at Matsurra.
DWB}

{2/16/95
Modified: Yasnac MX3 Mat [MM] M553.81.2
For: Murtaugh Represents / Aero Precision
Control: Yasnac i80
First Tool In Spindle. PreTool. Block delete CoolOn.
Changed output of OfstOff.
Jim Radcliffe}

{3/16/95
Modified: Yasnac i80 M00A.81.2
For: Murtaugh Represents / Aero Precision
Control: Fanuc 0M
Modified sub repetitions calls.
Modified Rigid Tapping cycle.
Jim Radcliffe}

{8/19/95, Updated Fanuc 0M [AP] M788.81.2 to .85 format per Fanuc 6M M001.85.01.02, JR}

{1/17/96, Updated .85 to .86 version, MPK}

{3/22/96, Tested zonlyRepAutoCycle, Changed version # to .89, MPK}

{4/8/98
Initial: Fanuc 0M [AP] D788.14
Created: Fanuc 0M Roku RM4V Dxxx.14
ForUser: Technical Metals, Inc.
Control: Fanuc 0M
Machine: Roku RM4V - 10 Pallett ( each pallet has its own program assigned to it )
Develop: ComPost2 1.1b3, Virtual Gibbs 4.24
Comment: New processor per edited and noted readout and conversation Matt.
Added Work Offset Variables to beginning of program.
Added G20 to saftry start blocks.
Changed to First Tool Not In Spindle.
Added Tool Change position at G91 G30 X0 Y0 Z0
Added Tool Presetter line.
Changed OfstOff in MachSpec from G49 to G30
Modified output of A and B axis:
Absolute positioning, output must be between 0 and 359
One degree increments with no decimal points and no minus signs
No control over direction, it will automatically take the shortest route
Jim Radcliffe}

{4/10/98
Initial: Fanuc 0M Roku RM4V Dxxx.14
Created: Fanuc 0M Roku RM4V Dxxx.14.1
Comment: Corrected Indexing Formulas
Jim Radcliffe}

{Prog Numeric Format Definitions ****}

#1 = '#.00'
#2 = '#####.###;0.'
#3 = '#####0'
#4 = '####.####;0.'
#5 = '#######0'
#6 = '####^##0'
#7 = '0000'

FORMAT(FileFeet#,1)
FORMAT(FileMeters#,1)
FORMAT(CSOffsetA#,2)
FORMAT(CSOffsetB#,2)
FORMAT(MUL#,3)
FORMAT(FeedTapIPR#,4)
FORMAT(ToolDiameter#,4)
FORMAT(CSOffsetX#,4)
FORMAT(CSOffsetY#,4)
FORMAT(CSOffsetZ#,4)
FORMAT(TrackZNO#,4)
FORMAT(ADD#,5)
FORMAT(CS#,5)
FORMAT(Operation#,5)
FORMAT(Tool#,5)
FORMAT(NewWFO#,5)
FORMAT(Parts#,5)
FORMAT(Dwell#,6)
FORMAT(Program#,7)
FORMAT(CallMasterNum#,7)
FORMAT(CSSubID#,7)

{Prog Subroutines ****}

restoreScale:
IF Metric? {CAM file is in Metric, tools and tool path}
SetScale('.03937007874') { change to English, this is an English post}
END
RETURN

mpESWFO: { MultipleParts EquallySpaced }
'G' ADD# PartNum# SUB# NewWFO# Num#('1')
RETURN

wfo:
'G' ADD# PartNum# Num#('53')
RETURN

wfoNum:
'G' NewWFO#
RETURN

wfoStuff:
IF NewWFO?
IF MultipleParts? AND WorkFixtureOffsets?
EOL
'*** WARNING *** DO NOT USE NEWWFO() WITH MULTIPLE PARTS AND WORK FIXTURE OFFSETS' EOL
ELSE
wfoNum
END
ELSE
IF Flag?('2')
IF NOT SameTool?
IF MultipleParts?
IF WorkFixtureOffsets?
wfo
ELSE
mpESWFO
END
ELSE
wfoNum
END
END
END
END
SetFlagF('2')
RETURN

doSubComment:
IF UseComments? AND SubComment?
'( SUB NUMBER: ' Program# ' )'
END
RETURN

doCSComment:
IF AAxisAvail? OR BAxisAvail?
'( CS#' CS# ' - ' CSComment$ ' )' EOL
END
RETURN

offsetComments:
IF ChangeCS?
doCSComment
ELSE
IF NOT SameTool?
doCSComment
END
END
RETURN

doOpComments:
IF UseComments?
SetScale('1')
IF OperationIDComment?
'( OPERATION ' Operation# ': ' OperationType$ ' )' EOL
END
IF OperationComment?
'( ' OperationComment$ ' )' EOL
END
IF WorkGroupComment?
'( ' WorkGroupComment$ ' )' EOL
END
IF ToolTypeComment?
'( TOOL ' Tool# ': ' ToolDiameter# ' ' ToolType$ ' )' EOL
END
IF ToolComment?
'( ' ToolComment$ ' )' EOL
END
restoreScale
END
offsetComments
RETURN

csAngleA:
IF AAxisAvail?
Save# Num#('1') SUB# DIV# CSOffsetA# Num#('360') TRUNC# DIV# CSOffsetA# Num#('360')
IF LessThan? Recall# Num#('1') Num#('0')
Save# Num#('1') ADD# Recall# Num#('1') Num#('1')
END
'A' MUL# Recall# Num#('1') Num#('360')
END
RETURN

csAngleAC:
IF AChange?
csAngleA
END
RETURN

csAngleB:
IF BAxisAvail?
Save# Num#('1') SUB# DIV# CSOffsetB# Num#('360') TRUNC# DIV# CSOffsetB# Num#('360')
IF LessThan? Recall# Num#('1') Num#('0')
Save# Num#('1') ADD# Recall# Num#('1') Num#('1')
END
'B' MUL# Recall# Num#('1') Num#('360')
END
RETURN

csAngleBC:
IF BChange?
csAngleB
END
RETURN

psInit:
NewWFOF
RotateF
OptCyc1F
MasterOpF
CallMasterOpF
RETURN

psStuff:
IF FourthCW?
FORMAT(FourthDegree#,2)
SeqC 'A' FourthDegree# EOL
FourthCWF
END
IF FourthCCW?
FORMAT(FourthDegree#,3)
SeqC 'A' FourthDegree# EOL
FourthCCWF
END
IF FifthCW?
FORMAT(FifthDegree#,2)
SeqC 'B' FifthDegree# EOL
FifthCWF
END
IF FifthCCW?
FORMAT(FifthDegree#,3)
SeqC 'B' FifthDegree# EOL
FifthCCWF
END
RETURN

doPostScript:
psInit
EachPS
SeqC PostScript EOL
psStuff
NextPS
RETURN

doEndOpPS:
psInit
EachEOPS
SeqC EndOpPS EOL
psStuff
NextPS
RETURN

entryMove:
IF FeedEntry?
SeqC Feed ZIn FeedEnt EOL
ELSE
SeqC RapidC ZIn EOL
END
RETURN

startSub:
OpenSub
ASCII('13') SubID doSubComment EOL
RETURN

subWarning:
IF NOT FeedConnect?
IF AnyZshift?
' ' EOL
'( WARNING Z CLEARANCE WILL CHANGE WITH EACH CYCLE OF SUB REPEAT )' EOL
' ' EOL
END
END
RETURN

stdSub:
SeqC SubCall CallLabB RepCycs Program# EOL
startSub
RETURN

finishSub1: {part 1}
SeqC CRCOffC
IF NOT FeedConnect?
IF AutoCycle?
ZCP3C
ELSE
IF FIFO?
FeedC ZCP3C FeedEntC
ELSE
RapidC ZCP3C
END
END
END
EOL
RETURN

finishSubG92: {part 2}
SeqC Preset ShiftRC EOL
SeqC EndSub EOL
CloseSub
SeqC Preset UnshftRC EOL
RETURN

toggleIncDecWFO:
IF Flag?('3')
SetFlagF('3')
ELSE
SetFlag('3')
END
RETURN

openMP:
NewProg
IF WorkFixtureOffsets?
IF Flag?('3')
NewWFO
EachWFO {simple eachPart}
SeqC SetWFO EOL
SeqC SubCall CallLabB Parts Program# EOL
IncWFO
NextWFO {simple NextPart}
DecWFO
ELSE
LastWFO
EachWFO {simple eachPart}
SeqC SetWFO EOL
SeqC SubCall CallLabB Parts Program# EOL
DecWFO
NextPrevWFO {simple NextPart}
IncWFO
END
IF Flag?('4')
toggleIncDecWFO
END
ELSE
SeqC SubCall CallLabB Parts Program# EOL
IF ExitClearancePlane?
SetFlag('2') { wfoStuff }
END
END
startSub
RETURN

closeMP:
IF WorkFixtureOffsets?
SeqC EndSub EOL
CloseSub
ELSE
SeqC Preset ShiftPC EOL
SeqC EndSub EOL
CloseSub
SeqC Preset UnshftPC EOL
END
RETURN

doAbsOrInc:
IF Flag?('1') AND AbsoluteMoves?
IF ZMove? AND AbsValue?
IncValue
ELSE
IF NOT ZMove? AND NOT AbsValue?
AbsValue
END
END
END
RETURN

doDrillAbsOrInc:
IF Flag?('1') AND AbsoluteMoves?
IF SPZMove? AND AbsValue?
IncValue
ELSE
IF NOT SPZMove? AND NOT AbsValue?
AbsValue
END
END
END
RETURN

restoreAbsOrInc:
IF Flag?('1') AND AbsoluteMoves? AND NOT AbsValue?
SeqC AbsValue EOL
END
RETURN

formatArc:
doAbsOrInc
IF ArcCW?
CWArcC
ELSE
CCWArcC
END
MoveXYZC
IF ArcIJFormat?
ArcIJC
ELSE
ArcRC
END
RETURN

ckCRC:
IF LastFeat?
CRCOffC
ELSE
IF NOT ZMove?
CRCOnC
END
END
RETURN

ckCRCNum:
IF NOT LastFeat? AND Equal? SPZ# EPZ#
CRCOffsetC
END
RETURN

toolPath:
ResetCRCNum
EACHFeat
IF PointFeat?
IF AutoCycle?
SeqC MoveSXYC EOL
SeqC SubCall CallLabB OnePart Program# EOL
CalcACSRXY {calc tool position after sub call, CalcAutoCycleStatusRecordXY}
ELSE
SeqC doDrillAbsOrInc MoveSXYZC EOL
END
ELSE
IF RapidFeat?
IF XMove? OR YMove? OR ZMove?
SeqC doAbsOrInc ckCRC RapidC MoveXYZC ckCRCNum EOL
END
ELSE
IF LineFeat?
IF XMove? OR YMove? OR ZMove?
IF Decelerate?
IF RoomToDecel?
DecelMove1
SeqC doAbsOrInc ckCRC FeedC MoveXYZC FeedRateC ckCRCNum EOL
DecelMove2
END
SeqC doAbsOrInc ckCRC FeedC MoveXYZC DecelFeed ckCRCNum EOL
ELSE
SeqC doAbsOrInc ckCRC FeedC MoveXYZC FeedRateC ckCRCNum EOL
END
END
ELSE
IF ArcFeat?
EACHQuadrant { Do not use NOT, FIRST, LAST or NEXT modifiers in this loop }
IF LastQuadrant? AND Decelerate?
IF RoomToDecel?
DecelMove1
SeqC formatArc ArcFeedC EOL
DecelMove2
END
SeqC formatArc DecelFeed EOL
ELSE
SeqC formatArc ArcFeedC EOL
END
NEXTQuadrant
END
END
END
END
NEXTFeat
restoreAbsOrInc
RETURN

autoCycCutSub1: {part 1}
SaveSubStatus {save tool position}
SetPass1 {element cut moves}
startSub
SetSRXYtoSP
SeqC IncValue EOL
RETURN

autoCycCutSub2: {part 2}
toolPath
SeqC AbsOrInc
IF Repeats? AND FeedConnect? AND ZshiftOnly?
ELSE
IF FIFO?
FeedC ZCP2 FeedEntC
ELSE
RapidC ZCP2
END
END
EOL
SeqC EndSub EOL
CloseSub
SetSRSubXY {restore SR to 1st position value}
SetSRSubMove
RETURN

autoCycPat:
SetPass2 {position pattern}
toolPath {call after NewProg for correct sub calls}
SetPass1 {reset}
RETURN

milling:
IF AutoCycle?
NewProg
autoCycCutSub1
entryMove
autoCycCutSub2
autoCycPat
ELSE
entryMove
toolPath
END
RETURN

g92Sub:
subWarning
stdSub
SeqC AbsOrInc Connect StrtPos EOL
milling
finishSub1
finishSubG92
RETURN

zonlyRepAutoCycle:
autoCycPat {write pattern moves and main calls}
startSub
NewProg
EachCycle
SetSRXYtoEP
IF FeedConnect?
Feed
IF NOT FirstCycle?
IF SPXMove? OR SPYMove?
SeqC IncValue StrtPosC EOL
AbsOrInc
END
END
SeqC ZInPlusInc FeedEnt EOL
ELSE
IF NOT FirstCycle?
Rapid
IF SPXMove? OR SPYMove?
SeqC IncValue StrtPosC EOL
AbsOrInc
END
IF FeedEntry?
SeqC ZCP2PlusInc EOL
END
END
IF FeedEntry?
SeqC Feed ZInPlusInc FeedEnt EOL
ELSE
IF FirstCycle?
Rapid
END
SeqC RapidC ZInPlusInc EOL
END
END
IF FirstCycle?
SetStatusOff {protect Z position for incremental sub}
END
SeqC SubCall CallLabB OnePart Program# EOL
NextCycle
SetStatusOn
autoCycCutSub1 {build element sub}
autoCycCutSub2
IF FeedConnect? {there is no Z up in the sub}
IF FIFO?
SeqC Feed ZCP2 FeedEnt EOL
ELSE
SeqC Rapid ZCP2 EOL
END
END
SeqC EndSub EOL
CloseSub
{Element shift, not pattern}
RETURN

zonlyRep:
EachCycle
IF NOT FirstCycle?
SeqC Connect StrtPos EOL
END
IF FeedConnect?
SeqC FeedC ZInPlusInc FeedEnt EOL
ELSE {Entry/Exit Connect}
IF FeedEntry?
IF NOT FirstCycle?
SeqC RapidC ZCP2PlusIncC EOL
END
SeqC Feed ZInPlusInc FeedEnt EOL
ELSE
SeqC RapidC ZInPlusInc EOL
END
END
SeqC SubCall CallLabB OnePart Program# EOL
NextCycle
startSub
TrackZNO# FIRST SPZ#
toolPath
finishSub1
SeqC EndSub EOL
CloseSub
RETURN

checkPass:
IF AutoCycle? {use the correct StrtPos}
SetPass2
ELSE
SetPass1
END
RETURN

skipToLastFeat:
EachFeat
IF LastFeat?
TrackXNO# SPX#
TrackYNO# SPY#
END
NextFeat
RETURN

setDrillEndOpZ:
IF RetractToCP1?
TrackZNO# ClearancePlane1#
ELSE
TrackZNO# ClearancePlane2#
END
RETURN

opGuts:
IF Milling?
SeqC ZCP2C EOL
IF Repeats?
NewProg
IF ZshiftOnly?
IF AutoCycle? {incremental Autocycle sub can have Z moves}
zonlyRepAutoCycle
ELSE {Z shift only, NOT Auto Cycle}
IF UseSeparateSubCalls? AND CyclesLessThanMaxSubCalls?
SetFlag('1') { Milling ZShiftOnly SepSubs }
zonlyRep
SetFlagF('1')
ELSE {no sep subs desired}
g92Sub
END
END {end Auto Cycle IF}
ELSE {not Z only}
g92Sub
END {end Z only IF}
ELSE {no repeat OPs}
milling
END
IF AutoCycle?
SeqC ZCP3C
ELSE
IF FIFO?
SeqC FeedC CRCOffC ZCP3C FeedEntC
ELSE
SeqC RapidC CRCOffC ZCP3C
END
END
ELSE
IF Drilling?
IF Repeats?
NewProg
stdSub
SeqC Rapid StrtPos EOL
END
GetCycle
IF Tap? AND OptCyc1? {Rigid Tapping Mode}
SeqC 'M29' Speed EOL
END
SeqC FromCP
IF FIFO? AND Dwell?
'G89'
ELSE
Cycle
END
ZDepth RLevel Dwell Peck Retract FeedEnt EOL
IF CallMasterOp?
SeqC SubCall CallLabB OnePart CallMasterNum# EOL
skipToLastFeat
ELSE
TrackZNO# FIRST SPZ#
IF MasterOp?
SetFlag('1') {std sep sub Zreps in effect}
NewMasterProg
SeqC SubCall CallLabB OnePart Program# EOL
startSub
toolPath
SeqC EndSub EOL
CloseSub
SetFlagF('1') {not std sep sub Zreps in effect}
ELSE
toolPath
END
END
SeqC DrillOff
IF Repeats?
EOL
finishSubG92
SeqC
END
ZCP3
END
END
RETURN

progStart:
InitProg
ReverseXZArcs
InitWFONum
SetFlood
UseSeparateSubCalls
SetMaxSeparateSubCalls('50')
SetMaxRPM('10000')
IF Metric?
SetMaxFeed('12700')
ELSE
SetMaxFeed('500')
END
SetFlagF('1') { Milling ZShiftOnly SepSubs }
SetFlagF('2') { wfoStuff }
SetFlag('3') { True = incrementing WFO numbers for MP. False = decrementing WFO numebrs for MP }
SetFlag('4') { True = toggle between incrementing/decrementing WFO's }
Save# Num#('1') Num#('0') { Rotary Axis Control }
IF PSComment? AND UseComments?
'PostScript:' EOL
' Literals: put between single or double quotes.' EOL
' Separate commands and literals with at least one space.' EOL
' A CR ( RETURN key ) will start a new line.' EOL
' Commands: may be capital and/or lower case letters. Separate commands with a space.' EOL
' EndOP -' EOL
' all literals and commands before an ENDOP command' EOL
' will appear at the beginning of the operation. All ' EOL
' literals and commands after an ENDOP command will appear' EOL
' at the end of the operation. ' EOL
' NewWFO(56), NWFO(56) -' EOL
' The Work Fixture Offset # you specify will be used for all following operations.' EOL
' Do not use with the ncPost multiple part option.' EOL
' 4thAxisCW(12.5), 4ACW(12.5) -' EOL
' generates a + A move of the value you specify' EOL
' 4thAxisCCW(22.5), 4ACCW(22.5) -' EOL
' generates a - A move of the value you specify' EOL
' 5thAxisCW(30), 5ACW(30) -' EOL
' generates a + B move of the value you specify' EOL
' 5thAxisCCW(22.5), 5ACCW(22.5) -' EOL
' generates a - B move of the value you specify' EOL
END
RETURN

initOp:
EOR EOL
ProgID1
IF UseComments? AND ProgramNameComment?
'( ' ProgramName$ ' )'
END
EOL
IF ToolChangeAtHome?
SetHome
END
{ Work Offset Variables }
'#2501=' EOL
'#2601=' EOL
'#2701=' EOL
IF UseComments?
IF ProgramComment?
'( ' ProgramComment$ ' )' EOL
END
IF FormatNameComment?
'( FORMAT: ' FormatName$ ' )' EOL
END
IF TimeComment?
'( ' Date$ ' AT ' Time$ ' )' EOL
END
IF MovesComment?
'( OUTPUT IN ' MoveType$ ' INCHES )' EOL
END
IF PartsComment?
'( PARTS PROGRAMMED: ' Parts# ' )' EOL
END
IF StartToolComment?
'( FIRST TOOL NOT IN SPINDLE )' EOL
END
END
OpenSub
restoreScale
RETURN

firstOp1:
Seq Rapid Plane 'G20' CRCOff DrillOff AbsOrInc EOL
doOpComments
SeqC IncValue 'G30X0Y0Z0' OpToolID EOL
SeqC OpToolID ToolChng EOL
SetLineStrtChr('/')
SeqC 'G10' OpToolID ToolOfst EOL
SetLineStrtChr('')
doPostScript
RETURN

firstOp2:
SeqC wfoStuff EOL
checkPass
SeqC Rapid AbsOrInc StrtPos csAngleA csAngleB Speed SpinOn EOL
RETURN

firstOp3:
SeqC OfstOn
IF NOT LastTool?
PreTool
END
CoolOn EOL
RETURN

newToolOp1:
CoolOff EOL
IF MultipleParts? AND AllToolsOnePart? AND FullUp?
SeqC IncValue OfstOff EOL
ELSE
IF ToolChangeAtHome?
SeqC IncValue OfstOff EOL
END
END
RETURN

newToolOp2:
doEndOpPS
IF ToolChangeAtHome?
SeqC AbsOrInc Rapid Home EOL
ELSE
SeqC IncValue 'G30X0Y0Z0' EOL
END
IF LAST ProgStop?
SeqC 'M0' EOL
ELSE
SeqC ProgStop EOL
END
SeqC OpToolID ToolChng EOL
SetLineStrtChr('/')
SeqC 'G10' OpToolID ToolOfst EOL
SetLineStrtChr('')
RETURN

newToolOp3: {Start new Operation}
Seq Rapid Plane 'G20' CRCOff DrillOff AbsOrInc EOL
doOpComments
doPostScript
RETURN

newToolOp4:
SeqC wfoStuff EOL
checkPass
SeqC Rapid AbsOrInc StrtPos csAngleA csAngleB Speed SpinOn EOL
RETURN

newToolOp5:
SeqC OfstOn PreTool CoolOn EOL
RETURN

sameToolOp1:
IF LAST ProgStop?
CoolOff EOL
SeqC IncValue OfstOff EOL
doEndOpPS
SeqC 'M0' EOL
Seq Rapid Plane CRCOff DrillOff AbsOrInc EOL
ELSE
IF CoolOff? AND LAST NOT CoolOff?
CoolOff
END
EOL
IF NewToolOffset?
SeqC IncValue OfstOff EOL
END
doEndOpPS
END
RETURN

sameToolOp2: {Start new Operation}
doOpComments
doPostScript
checkPass
RETURN

sameToolOp3: {Start new Operation}
SeqC wfoStuff EOL
IF LAST ProgStop?
SeqC StrtPos csAngleA csAngleB Speed SpinOn EOL
SeqC OfstOn CoolOn EOL
ELSE
SeqC Rapid PlaneC AbsOrInc StrtPos csAngleA csAngleB SpeedC EOL
IF NewToolOffset?
SeqC OfstOn EOL
END
IF NOT CoolOff? AND LAST CoolOff?
SeqC CoolOn EOL
END
END
RETURN

end1:
CoolOff EOL
IF MultipleParts? AND AllToolsOnePart? AND FullUp?
SeqC IncValue OfstOff EOL
ELSE
IF FIRST ToolChangeAtHome?
SeqC IncValue OfstOff EOL
END
END
RETURN

end2:
doEndOpPS
IF FIRST ToolChangeAtHome?
SeqC Rapid AbsOrInc FirstHome EOL
SeqC IncValue 'G30B0' SpinOff EOL
ELSE
SeqC IncValue 'G30X0Y0Z0B0' SpinOff EOL
END
IF ProgStop?
SeqC 'M0' EOL
ELSE
IF MultipleParts? AND AllToolsOnePart?
SeqC ProgStop EOL
END
END
RETURN

end3:
SeqC 'M63' EOL
SeqC EOP EOL
CloseSub
Post2 {organize Subs into one program}
EOR EOL
Close
IF UseComments?
SetScale('1') {restore scale for comments}
Reopen
IF FileBytesComment?
'( FILE LENGTH: ' FileBytes# ' CHARACTERS )' EOL
END
IF FileFeetComment?
'( FILE LENGTH: ' FileFeet# ' FEET )' EOL
END
IF FileMetersComment?
'( FILE LENGTH: ' FileMeters# ' METERS )' EOL
END
Close
END
RETURN

mpallTools1P: {Multiple Parts, All Tools 1 Part}
EachOp {Start of post processing}
IF EquallySpacedOffsets?
SetFlag('2')
END
IF FirstOperation?
initOp
openMP
firstOp1
firstOp2
firstOp3
ELSE
IF NewTool?
newToolOp1
newToolOp2 {to tool change, CS problem}
newToolOp3
newToolOp4
newToolOp5
ELSE {implied SameTool?}
sameToolOp1
sameToolOp2
sameToolOp3
END
END {common point for all operations}
opGuts
NextOp {loops back to EachOP until last Operation}
end1 {End of program}
end2
closeMP
end3
RETURN

mp1ToollAllPfu: {Multiple Parts, 1 Tool all Parts, full up}
EachOp {Start of post processing}
IF EquallySpacedOffsets?
SetFlag('2')
END
IF FirstOperation?
initOp
firstOp1
openMP
firstOp2
firstOp3
ELSE
IF NewTool?
newToolOp1
closeMP
newToolOp2 {to tool change, CS problem}
newToolOp3
openMP
newToolOp4
newToolOp5
ELSE {implied SameTool?}
sameToolOp1
sameToolOp2
sameToolOp3
END
END {common point for all operations}
opGuts
NextOp {loops back to EachOP until last Operation}
end1 {End of program}
closeMP
end2
end3
RETURN

mp1ToollAllPXcp: {Multiple Parts, 1 Tool all Parts, exit Clearance plane}
EachOp {Start of post processing}
SetFlag('2')
IF FirstOperation?
initOp
firstOp1
firstOp2
firstOp3
openMP
firstOp2 {need StrtPos in Sub}
ELSE
IF NewTool?
EOL
closeMP
SeqC
newToolOp1
newToolOp2 {to tool change, CS problem}
newToolOp3
newToolOp4
newToolOp5
openMP
newToolOp4 {need StrtPos in Sub}
ELSE {implied SameTool?}
sameToolOp1
sameToolOp2
sameToolOp3
END
END {common point for all operations}
opGuts
NextOp {loops back to EachOP until last Operation}
closeMP {End of program}
end1
end2
end3
RETURN

noMPs: {no multiple parts}
EachOp {Start of post processing}
SetFlag('2') { wfoStuff }
IF FirstOperation?
initOp
firstOp1
firstOp2
firstOp3
ELSE
IF NewTool?
newToolOp1
newToolOp2
newToolOp3
newToolOp4
newToolOp5
ELSE {implied SameTool?}
sameToolOp1
sameToolOp2
sameToolOp3
END
END {common point for all operations}
opGuts
NextOp {loops back to EachOP until last Operation}
end1 {End of program}
end2
end3
RETURN

{Start of executable Prog, Top Level ****}

progStart {setup and initializations}

IF MultipleParts?
IF AllToolsOnePart?
mpallTools1P
ELSE {implied OneToolAllParts?}
IF FullUp?
mp1ToollAllPfu
ELSE {implied ExitClearancePlane?}
mp1ToollAllPXcp
END
END
ELSE
noMPs
END