Model C3 BSI 2006 --
Note: Combination and BSI with the same km Must be programmed stand!

                    Use the following board and bracket

 * Build now the BSI module. It is to the left under the cover in FahrerfuSraum
* Locate the 8 pin connector chip 95160
* Perpendiculars from this chip.
* Connect the clip to Port 4th
* Set the bracket on the chip 95160 (red on pin 1)
* Select the DIGA-Consult Citroen C3 BSI V4
* The DIGA-Consult shows you the old Kilometers to.
* Select menu, KM others.
* Enter the new KM-stand.
* Confirm the new KM-stand with OK.
* Build now BSI first module and then the combined instrument again.

---