2vrc55qf22cpmf45q1s11145 ISO CHARTS1

Table 1: Reguirements for marinę distillate fuels

Characteristic	Unit	Limit	Category ISO-I				Test Method
			DMX	DMA	DMB	DMC	Reference
Density at 15°C	kg/m'	max.		890.0	900.0	920,0	ISO 3675/ISO 12185
Viscosity at 40°C	mrrp/s	min.	1.40	1,50	•	-	ISO 3104
		max.	5,50	6,00	11.00	14.0	ISO 3104
Flash Point		min.	-	60	60	60	ISO 2719
		max.	43	-	-	-	IS02719
Pour Point (upper) Winter quality	°C	min.		-6	0	0	ISO 3016
Summcr (|uality		max.	-	0	6	6	ISO 3016
Cloud Point	°C	max.	-16	-	-	-	ISO 3015
Sulphur	% (m/m)	max.	1.00	1,50	2.00	2,00	ISO 8754 / ISO 14596
Cetane lndex		min.	45	40	35	-	ISO 4264
Carbon Residue
on 10% (V/V) distillation	% (m/m)	max.	0,30	0.30	-	-	ISO 10370
bottoms
Carbon Residue	% (m/m)	max.	-	-	0.30	2.50	ISO 10370
Ash	% (m/m)	max.	0,01	0.01	0.01	0.03	ISO 6245
Appearance	Clear and bright				5)	-	See 7.4 & 7.5
Total sediment, cxistant	% (m/m)	max.	-	-	0.10	0.10	ISO 10307-1
Watcr	% (V/V)	max.	-	-	0.3	0.3	ISO 3733
Vandinium	mg/kg	max.	•	-	-	100	ISO 14597 / IP 501 / 1P470
Aluminium plus Silicon	mg/kg	max.	-	-	-	25	ISO 10478 /1P 501 / 1P470
Used lubricating oil (ULO)
Zinc	mg/kg	max.	15	15	15	15	IP 501 / IP 470
Phosphorous	mg/kg	max.	15	15	15	15	IP 501 / IP 500
Calcium	mg/kg	max.	30	30	30	30	IP 501 / IP 470
The fuel shaB be conskfored (ree of ULO if one or morę of the elements Zn. P and Ca aro betow or at the speci-fied limits. Al! three elements shall exceed the same limits before a fuel shali be deemed to contain ULO.