Rozrzad 5

Rozrzad 5



ENGINE-’L’ SERIES

10.    Fit belt tensioner access pług to back cover.

11.    Remove Allen bolt access pług from timing gear lower cover.

12.    Fit camshaft timing gear lower cover. See this section.

15.    Loosen Allen bolt securing tensioner pulley, altow pulley to react then tighten Allen bolt to 55 Nm. Fit Allen bolt access pług.

16.    Remove FIP timing belt cover. See this section.

13.    Remove timing pin LRT-12-058 and using a socket and extension bar on crankshaft pulley bolt, rota te crankshaft 2 revolutions clockwise until timing pin LRT-12-058 can be inserted in hole in flywheel.

14.    Check camshaft gear timing mark is aligned with mark on back cover.

45


REPAIRS


Wyszukiwarka

Podobne podstrony:
Rozrzad 4 ENGINE-’L’SERIES 24.    Remove timing belt tensioner access pług from 
Rozrzad 2 ENGINE-’L’SERIES Ali models 5.    Fit lifting bracket LRT-12-138 to lifting
Rozrzad 3 ENGINE-’L’ SERIES 17.    Remove and discard 3 Torx screws securing dam
Rozrzad 7 ENGINE-’L’ SERIES 25. Insert locking pin LRT-12-141 through hole in FIP drive gear and int
Rozrzad 8 ENGINE-’L’SERIES Models fitted with air conditioning 39.    Fit compressor
Rozrzad 1 ENGINE -’L’SER!ES RefitBELT - CAMSHAFT DRIVE 1.    Position oil cooler. 2.
Rozrzad 6 ENGINE-’L’SERIES 21. 22. 17.    Insert locking pin LRT-12-141 through hole
hjp01 Ul IH uą 114 i i © » KwiMI ■ ‘ C *- i a- * «.Ut *«ł» i*    «*»# U. *WW* 10
00230 819cd9235a78d0f202ffb72a6ad790 232 Baxley Figurę 10. Fit of IMA Model to Machinę Average Y2
sobczak 419 r MĄZVW/łM Sfl? ^ WoJT£K. M4M 10 MT. SZUMM KOLćGÓW . I kol&łhM£k...   
Rnrr A -i) £ Px =0 10 =0 2D-k -Ąo-h-5 + 2>o + V/r -O ^ Pi - 12i&6 kA] I 3)?P^-0Xl^6 -^0
4~^S $*->rtz t»‘«NVr) l1 -1*nj 0 fciftit $£•*<> 3 No.10 11 12 13 (p. %8) t«W] 10

więcej podobnych podstron