Rozrzad 3
ENGINE-’L’ SERIES
17. Remove and discard 3 Torx screws securing damper to camshaft gear.
18. Remove damper from camshaft gear.
22. Insert timing pin LRT-12-058 through hole in gearbox mounting piąte, hołd pin in contact with flywheel and using assistance. rotate crankshaft clockwise until pin can be felt to enter hole in flywheel.
CAUTION: Never use the camshaft gear, gear retaining bolt or timing belt to rotate crankshaft.
23. Check that timing marks on camshaft gear and back cover are aligned.
19. Remove 4 nuts and 2 bolts from RH engine mounting bracket piąte.
20. Remove piąte from RH engine mounting bracket.
21. If timing belt is to be refitted, mark direction of rotation.
43
REPAIRS
Wyszukiwarka
Podobne podstrony:
Rozrzad 7 ENGINE-’L’ SERIES 25. Insert locking pin LRT-12-141 through hole in FIP drive gear and int
Rozrzad 5 ENGINE-’L’ SERIES 10. Fit belt tensioner access pług to back cover. 11.
Rozrzad 4 ENGINE-’L’SERIES 24. Remove timing belt tensioner access pług from
Rozrzad 6 ENGINE-’L’SERIES 21. 22. 17. Insert locking pin LRT-12-141 through hole
Rozrzad 1 ENGINE -’L’SER!ES RefitBELT - CAMSHAFT DRIVE 1. Position oil cooler. 2.
Rozrzad 2 ENGINE-’L’SERIES Ali models 5. Fit lifting bracket LRT-12-138 to lifting
Rozrzad 8 ENGINE-’L’SERIES Models fitted with air conditioning 39. Fit compressor
3 (549) £ * FIGURĘ 17-9 Flow velocity in a valley glacifcr vari«s borh hońzonially and vertically. V
00235 Nff6c37df02571c6249b1ae331f002f 237 Applications of the EWMA Box, G. E. P., and Jenkins, G. M
psychologia religii2 156 17* Kennedy D* and Kerber A* /1973/: Rosocialization* An American .. Exper
14Starkel The series of syntheses and monographs, including the synthesis of the paleogeogra-phy of
Scannen0029 kteben ktebyzLichterbogen („Krippe") S £ IT E 17 + 32 CL GL © frechwerlag Stuttgart
więcej podobnych podstron