3/8" threaded rod, 19 cm long.
3/8" x 3" carriage bolt (for locking knob) Knob with 3/8" thread. (for locking knob)
3/8" x 1.5" bolt (for primary gear)
3/8" nut. need 3.
3/8" t-nut (press into bottom gear)
1.5" #10 sheet metal screw. need 6. (to hołd router mount) 1 1/4" #8 wood screw. need 22 3/4" #6 sheet metal screw, need 2 (to hołd nut in błock) 3/4" #6 screw wood screw, need 3 (to hołd crank handle)
Long #8 screw with thread-less shank, cut to 1.5" long. Also get a smali washer to fit around the screw.
Screw and washer are used for the crank handle.
3/8 doweling (to dowel fence together) Only need about 10 cm of dowel.
Door catch magnet
Not shown: 4" hose clamps (need 2) to hołd router.
T-nut and for 5/16" bolt, need 2 (Pres into bottom of table)
Washer for 5/16" screw, need 2 (glue to bottom of hołd down knobs)
1/4" x 2" Connector bolt, Need 4. (to hołd sacrificial fence)
1/4" wing nut for connector bolt
Wood needed:
1/4" sheet of 3/4" russian birch plywood 3/8" russian birch plywood (for gears)
1 board of Mapie, 2 cm thick.