hardware list

Hardware list

5/16 (M8) threaded rod, 20 cm and 25 cm long

□

3/8" x 4" carriage bolt. Need 1 for depth lock

		■*

O

Knob with 3/8" thread. IMeed 1 for depth lock

5/16" x 1.25" bolt for primary gear

5/16" nut. need 4.

I>-

N

►=

1 1/2" washer, need 3. One for depth lock, two for fence holddown

5/16 or 8 mm i.d. bali bearing, 7/8" o.d.

Need 2. One for threaded rod, one for crank

5/16 x 2" bolt, need 2 for fence holddown

T-nut, 5/16" (M8) thread. Need 11.

Two for elevating mechanism, 8 for table, one for tilt lock knob

(°>

t=

► *

(

an

Washer for 5/16" screw. Need one for angle lock.

ii

1/4" x 2" Connector bolt, Need 4. to hołd sacrificial fence

>

1/4" wing nut for connector bolt

3/4" washer for 1/4" screw, need 4 for fence.

4 for hinges, one to clamp insert magnet

1 5/8" (40 mm) drywall screws, need 22 8 for router mouts, 10 for hinge flanges,

4 for lift bearing mount

1 1/4" (30 mm) drywall screws 6 for hinge flanges, 8 to mount angle locks,

3 for lift błock nut, 2 for dust błock

3/4" #6 screw wood screw, need 3 (to hołd crank handl

Long #8 screw with thread-less shank, cutto 1.5" long when used for crank handle 5/8" (16 mm) countersink screw, for insert magnet to puli down on. need 1 per insert Magnet for holding down insert

3/8 doweling (to dowel fence together)

Only need about 20 cm of dowel.

Not shown:

4" hose clamps (need 2) to hołd router.