65514 Suzuki RM1251

FRONT AND REAR BRAKES 15-9

CALIPER CLEANING

•    Flush the caliper ports with pressurized air.

♦    Wash the caliper piston and cylinder with fresh brake fluid.

NOTĘ:

Do not use gasoline or other cteaning solvents to wash the caliper parts.

FRONT CALIPER REASSEMBLY

Reassemble and remount the brake caliper in the reverse order of removal. Pay attention to the following points:

♦ Apply brake fluid to the piston seals, dust seals and pistons and fit the piston seals, dust seals and pistons.

^ Specification and classification: DOT4

Fit the caliper brackets and pad springs.

Apply SUZUKI SILICONE GREASE to the ęaliper axles,^;

Gm 99000-25100: SUZUKI SILICONE GREASE x

Fit the brake pads. Tighten the brake pad mounting bolt tem-porarily.    \ \\\ \

*    Tighten the caliper mounting bolts to the specified torque.

H Brake caliper mounting bolt ®:

26 Nm (2.6 kgf-m, 18.9 Ib-ft)

♦    Tighten the brake pad mounting pin © to the specified torque.

H Brake pad mounting pin <D:

17.5 N m (1.75 kgf-m, 13.2 Ib-ft)

*    Tighten the brake hose union bolt to the specified torque.

H Brake hose union bolt <D: 23 Nm (2.3 kgf-m, 16.5 Ib-ft)

•    Refill brake fluid and bleed air from the brake system. (0=15-4)

v \