PERIODIC MAINTENANCE 2-7
PERIODIC MAINTENANCE 2-7
s V
♦ Remove the seat. (0^3-2)
♦ Remove screw (i).
♦ Remove the element trom the element holder.
♦ Fili a washing pan that is large enough to hołd the element with non-flammable cleaning solvent Immerse the element in the solvent and wash it.
♦ Squeeze the element by grasping it to remove excess sol-vent. Do not twist or wring the element, or it will develop cracks.
♦ Dry the element in a plastic bag, pour in some toam filter bil ,(§> and work the oil into the element.
Squeeze the element to remove excess oil. \ \ )
\ \ \ V"
♦ Apply grease to the element base where cóntacts the air
cleanerbox. V\ \ \ V'
♦ Fit the element onto the^lemeht holder.^
NOTĘ:
Fit the projection of the elęmeht holder in the hole of the element base.
* Install the reassembled element to the air cleaner box so that the projection of the element aligned with the projection of the box.
CAUTION
Improper element installation allows dust and dirt to enter the combustion chamber. It can result in piston and cylinder wear.
Be surę to check the element seals properly after installing the elements.
0® . © * |
_▲_ |
✓*• \ _r__ 0T- ' ■ ◄ \ < •k \ . \ V' y' \ ^ |
▼ 1 |
.X