81749 Suzuki RM250ƒ
8-10 TRANSMISSION AND CRANKSHAFT
8-10 TRANSMISSION AND CRANKSHAFT
w—w
ircsn
BEARING INSPECTION, REMOVAL AND INSTALLATION
• Inspect the bearings for play, discoloration, wear and seizure.
• Move the inner race by finger and inspect for smooth move-ment.
• Remove the bearing retainers.
• Remove and install the bearings with the special tool.
Bearing remover/installer
TOOL NO.
Remover
09917-50410
Installer
09913-70210
Others
Remover
09921-20240
Installer
09913-70210
• Tighten the bearing retainer screws to the specified torque. H Bearing retainer screw: 10 N m (1.0 kgf-m, 7.0 Ib-ft)
Wyszukiwarka
Podobne podstrony:
suzuki rm25008 10-6 COOLING SYSTEMREASSEMBLY Reassemble and remount the water pump in the reverse o
26502 Suzuki RM2507 FRONT FORK AND STEERING 15-21 FRONT FORK AND STEERING 15-21 Approx.10 mm (0.39
70714 Suzuki RM250? 9-10 FUEL SYSTEMCARBURETORREMOVAL AND DISASSEMBLY • Remove the
87472 Suzuki RM2504 14-2 FRONT AND REAR BRAKESCONSTRUCTION H 10 N-m (1.0 kgf-mt 7.0 Ib-ft) H 23 N-m
49586 Suzuki RM250 1-10 GENERAL INFORMATIONSTOPPING THE ENGINE 1) Shift the trans
Suzuki RM2508 10-6 COOLING SYSTEMREASSEMBLY Reassemble and remount the water pump in the reverse or
86618 Suzuki RM250? 8-14 TRANSMISSION AND CRANKSHAFT • Install the gearshift cam d
46902 Suzuki RM2506 10-4 COOLING SYSTEMWATER PUMP • Drain the engine coolant. (CZ
suzuki rm25006 10-4 COOLING SYSTEMWATER PUMP • Drain the engine coolant. (d7“ 2-1
więcej podobnych podstron