A6 2 8 (193 koni) APR

Audi A6 (97-05) 2,8 1997-02 Engine codę: APR

Impoitant notę

Rephicement lnteiv<il Guide

Check For Engine Doinoge

Repair Times - lus

Speciai Tools

Special Piecautions

Removal

Instailation

Installation

NOTĘ: Replace tensionei pulley (2.7 2.8 engines).

1.    Ensure crankshaft locking pin located correctly [10].

2.    Lightly tighten bolt of each camshaft sprocket (14).

3.    Ensure camshaft sprockets can tum freely but not tilt.

4.    Ensure large holes in locking plates of camshaft sprockets face in towards each other [9].

5.    Fit timing belt in anti-clockwise direction, starting at crankshaft sprocket.

6.    Ensure belt is taut between sprockets on non-tensioned side.

NOTĘ: If reusing old belt: OI>serve diiection of lotation marks.

7.    Temporarily install camshaft locking tool No.3391 to camshaft sprockets (13).

3. Tum tensioner pulley clockwise as far as possible. Use Allen key (16).

9. Remove pin from tensioner body [17] to release pushrod.

10.    Remove Allen key. Install torque wrench to tensioner pulley [19],

11.    Apply anti-clockwise torque of 15 Nm to tensioner pulley [20].

12.    Remove torque wrench.

13.    Tighten bolt of each camshaft sprocket. Tightening torque: (A) 30 Nm [14],

14.    Remove camshaft locking tool [13]. Tool No.3391.

15.    Hołd camshaft sprockets. Use tool No.3036.

16.    Tighten bolt of each camshaft sprocket. Tightening torque: (B) 55 Nm [14],

17.    Fit timing belt lower cover [13].

13. Install crankshaft pulley ensuring notches on pulley and hub are aligned [21].

19.    Remove crankshaft locking pin [10],

20.    Fit blanking pług to cylinder błock.

21.    Install components in reverse order of removal.

22.    Tighten crankshaft pulley bolts to 20-22 Nm [11 ].