294

STEERING COLUMN

Installation

Disassembly and Assembly

• Loosely tighten all lower bracket and clamp retaining bolts; then retighten them securely. Make surę that undue stress is not applied to steering column.

• While disassembling and assembling, unlock steering lock with a key.

• Ensure that rounded surface of snap ring faces toward bearing when snap ring is installed.

Washer —\

Inspection

• When steering wheel can not be rotated smoothly, check the steering column for the following matters and replace damaged parts.

(1)    Check column bearings for damage or uneven-ness. Lubricate with recommended muiti-purpose grease or replace with a new one as a steering column assembly, if necessary.

(2)    Check jacket tubę for deformation or breakage. Replace if necessary.

• When the vehicle comes into light collision, • check dimension "L". If it is not within specifications, replace steering column as an assembly.

Column length "L":

Non-tilt type

573.2 - 574.8 mm (22.57 - 22.63 in)

Tilt type

563.2 - 564.8 mm (22.17 - 22.24 in)

L

SST103A